Edit: The issue was finally resolved! Only thanks to the help of the brilliant and kind TonyR. It was because partially the Ethernet wasn’t plugged in the right port, yeah….
But it wouldn’t have worked either way if not configured properly, which Tony helped tremendously with; read through the post and look at how to troubleshoot and configure it. Good luck!
Edit fin.
Hi all,
My NVR is the HikVision DS-7604NI-K1/4P(B) , I have a TP-Link TL-WA801ND connected via ethernet to the NVR acting as a client, the TP link is connected to my 2.4Ghz band of my wifi, the wifi internet is provided by the Netgear Nighthawk R7000.
No matter what I do however, such as enabling DHCP in the NVR, in SADP, is working, the NVR still says connection status offline and thus I cannot get hikconnect to function.
Perhaps this is a port forwarding issue here?
Any help is appreciated, thank you.
But it wouldn’t have worked either way if not configured properly, which Tony helped tremendously with; read through the post and look at how to troubleshoot and configure it. Good luck!
Edit fin.
Hi all,
My NVR is the HikVision DS-7604NI-K1/4P(B) , I have a TP-Link TL-WA801ND connected via ethernet to the NVR acting as a client, the TP link is connected to my 2.4Ghz band of my wifi, the wifi internet is provided by the Netgear Nighthawk R7000.
No matter what I do however, such as enabling DHCP in the NVR, in SADP, is working, the NVR still says connection status offline and thus I cannot get hikconnect to function.
Perhaps this is a port forwarding issue here?
Any help is appreciated, thank you.
Last edited: