Defender666
Getting the hang of it
- Joined
- Dec 19, 2015
- Messages
- 193
- Reaction score
- 25
no this ist for 2xx2 Cameras and firmware < 5.3.0
))Change the language back again. It's reversible.
I though you had changed the language of a firmware header, which changes the header checksum, and wanted to get back to the original firmware.I changed the language flag (modify file) in a firmware update file
Maybe I do not understand the problem.
......
What type of camera, what version of firmware?
And what exactly is the problem?
Maybe the Russian one from here might work : http://www.hikvisioneurope.com/portal/index.php?dir=Product Firmware/Recorder/DS-7100NI-SN/v3.0.18_151231 English & Multi-lingual/Multi language/I need multi language firmware for this NVR and IPC with support for Russian and English languages.
This firmware file also is not load to update .Maybe the Russian one from here might work : http://www.hikvisioneurope.com/portal/index.php?dir=Product Firmware/Recorder/DS-7100NI-SN/v3.0.18_151231 English & Multi-lingual/Multi language/
в чем подвох? почему предыдущие версии будут загружаться. Китайское ограничение для всех кроме китайского языкаВы не сможете установить русскоязычную прошивку версии выше 3.0.13 в китайский видеорегистратор, не тратьте напрасно время...
Maybe the Russian one from here might work : http://www.hikvisioneurope.com/portal/index.php?dir=Product Firmware/Recorder/DS-7100NI-SN/v3.0.18_151231 English & Multi-lingual/Multi language/
The problem is solved. Hikvision NVR DS-7104/08-SN/N/P, DS-7804/08N-SN firmware 3.13 build 150503Dear GSMbox,
I'm also facing same problem. Have you find the solution? Please guide me. But my NVR is DS-7104N-SN/P with V3.0.18 build151231. Please support.
U-Boot 2010.06-153460 (Oct 10 2015 - 18:21:59)
NAND: 128 MiB
Hit Ctrl+u to stop autoboot: 0
HKVS #
Unknown command '' - try 'help'
HKVS #
HKVS # help
? - alias for 'help'
base - print or set address offset
bootss - boot from snapshot image
cmp - memory compare
cp - memory copy
crc32 - checksum calculation
ddr - ddr training function
format - format flash except bootloader area
go - start application at address 'addr'
help - print command description/usage
loadk - load kernel to DRAM
loop - infinite loop on address range
md - memory display
mii - MII utility commands
mm - memory modify (auto-incrementing address)
mtest - simple RAM read/write test
mw - memory write (fill)
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
saveenv - save environment variables to persistent storage
setenv - set environment variables
update - update digicap.dav
updateb - update bootloader
upf - update firmware, format and update (factory use)
version - print monitor version
HKVS #