So I've been using the Hikvision 7616-E2-EP NVR and 7 DS-2CD2142FWD-IS Domes hooked up to it via POE with virtual host enabled. I have setup all the cameras on TinyCamPro just fine and they were working properly (basically using the IP Address of the NVR with each specific port for the virtual host cameras (e.g., 65001 is camera 1, 65002 is camera 2, etc). The only protocol that work for these is JPG/snapshot.
For some reason, I can not get my new 2347G-LU to show video when it is hooked up to the NVR. I know the password is right, but I get a Video Failed (Timeout, check hostname and port number) error.
If I plug the camera into just a regular POE switch and give it its own IP address, TinyCamPro easily finds the camera, and for whatever reason I need to select RTSP over TCP as the protocol, and it works perfectly.
But I just can't get it to play nicely when it is attached to the NVR.
Any ideas?
For some reason, I can not get my new 2347G-LU to show video when it is hooked up to the NVR. I know the password is right, but I get a Video Failed (Timeout, check hostname and port number) error.
If I plug the camera into just a regular POE switch and give it its own IP address, TinyCamPro easily finds the camera, and for whatever reason I need to select RTSP over TCP as the protocol, and it works perfectly.
But I just can't get it to play nicely when it is attached to the NVR.
Any ideas?