Shaun Barrow
n3wb
- Joined
- Apr 19, 2016
- Messages
- 26
- Reaction score
- 8
Hello all, been using BI for awhile, and finally upgraded from mostly 1440p cameras to full 4k cameras. Since I have upgraded, im noticing my CPU will never go down from 99-100%. I have went through the CPU optimizing and still not getting great results.
All of my 4k cameras are configured like this:
![1592243535389.png](/data/attachments/63/63928-19923be1c9e5e597213798c777e2d040.jpg)
The last part of the CPU optimization I have not done is the substreams.
For this example I am using an Amcrest IP8M-2597E camera.
Using the settings for Amcrest:
![1592242380136.png](/data/attachments/63/63925-56f4c7053d23c8024995f5604ed7b675.jpg)
Sub Stream is: /cam/realmonitor?channel={CAMNO}&subtype=1&authbasic={AUTH64}
With these configurations, I get no sub stream.
But if i let BI Find/inspect i get:
![1592242448569.png](/data/attachments/63/63926-a8adc569fa0a8d7967ee756ff5f28488.jpg)
When i add the substream of: /cam/realmonitor?channel=1&subtype=1&unicast=true&proto=Onvif and save that. I get substream data flowing in, but then BI will start to crash over and over, with the only error logged being "Restarted after unexpected shutdown (1500/240)
It will not stop crashing until i remove that sub stream. Any thoughts?
(updated with corrected screenshots)
All of my 4k cameras are configured like this:
![1592243535389.png](/data/attachments/63/63928-19923be1c9e5e597213798c777e2d040.jpg)
The last part of the CPU optimization I have not done is the substreams.
For this example I am using an Amcrest IP8M-2597E camera.
Using the settings for Amcrest:
![1592242380136.png](/data/attachments/63/63925-56f4c7053d23c8024995f5604ed7b675.jpg)
Sub Stream is: /cam/realmonitor?channel={CAMNO}&subtype=1&authbasic={AUTH64}
With these configurations, I get no sub stream.
But if i let BI Find/inspect i get:
![1592242448569.png](/data/attachments/63/63926-a8adc569fa0a8d7967ee756ff5f28488.jpg)
When i add the substream of: /cam/realmonitor?channel=1&subtype=1&unicast=true&proto=Onvif and save that. I get substream data flowing in, but then BI will start to crash over and over, with the only error logged being "Restarted after unexpected shutdown (1500/240)
It will not stop crashing until i remove that sub stream. Any thoughts?
(updated with corrected screenshots)
Attachments
-
71 KB Views: 10
Last edited: