Impossible to playback recording stored at FTP

[Acumen]

Hi All,

After a couple D-Link Cams I recently bought a Dahua SD22204T-GN-W and am playing/experimenting with it. I configured an IVS rule and managed to successfully store the triggered recording onto my FTP server. The thing is that the recordings are not shown in the playback tab.
Time and date settings are correct, the recordings are shown on my FTP server etc.

The only thing I can think of, is that playback is only possible with an SD card inserted and that the SD Card is used as temporary storage for playback. But I was not able to find that in the manual. Anyone a clue what I am doing wrong?

- A.

 

[cor35vet]

FTP is not supported for remote playback, only NFS and SD card.
See: https://www.ipcamtalk.com/showthrea...k-your-cameras-that-record-to-their-local-NFS

 

[Acumen]

FTP is not supported for remote playback, only NFS and SD card.
See: https://www.ipcamtalk.com/showthrea...k-your-cameras-that-record-to-their-local-NFS

Thanks, then I will give it a go at my Synology instead of DDWRT FTP server with Samba (no NFS support on DDWRT unfortunately).

 

[nayr]

and of course a Dahua NVR will playback fine..

 

[afddwfadwfadwf]

FTP is not supported for remote playback, only NFS and SD card.
See:

https://www.ipcamtalk.com/showthrea...k-your-cameras-that-record-to-their-local-NFS

OP is asking about local playback, where only SD is supported.

 

[alastairstevenson]

OP is asking about local playback, where only SD is supported.

Personally I found Dahua 's use of 'local' and 'remote' a tad confusing, I think the response is OK.
But after nearly 4 years I expect the OP understood.