IVS Rules, Am I doing it right?

[dubber]

Hey All, please see below ivs rules for my cams, left and right spotter cams.

Am I doing these rights? Is there a way to be more efficient at it?

Example, my right spotter cam won't trigger until it's too late.
The subject would be walking down the entire length of red line, the spotter cam won't trigger anything. When the subject finally enter the PTZ field of view past the tree, the PTZ will start to trigger and all of a sudden the right spotter cam will get trigger. (Please see 2nd picture for reference)

The sensitivity is set to 10 for all human only IVS



Example

 

[wittaj]

Some times less is more. Too many IVS rules and you peg out the little processor in the cam and it bugs out right when you want it to trigger. How many of the IVS rules are going at one time?

Most of my cams are only one IVS rule, 2 at most. Now I may have 2 or 3 IVS rules based on certain circumstances and are on a schedule so that only one or two are active at a time, but we have seen enough instances here where cams can't keep up with pushing them on every rated spec.

I would go with your third image on each one.