I didn't want to upgrade the firmware as everything worked just fine. But I got tired of the upgrade firmware dialog box always on the screen of my video monitor partially blocking my camera views and seemingly no way to permanently prevent it from showing. So I reluctantly did the upgrade and that's when the issue of viewing my cameras in TinyCam Pro started. I reached out to Lorex and their solution was to use their app. Although that works, in comparison to TinyCam, their app simply sucks.
My TinyCam settings should be fine as they worked prior to the firmware upgrade and had for the last 3.5 years that I've owned the system. I can switch protocols from RTSP over TCP to Snapshot (JPEG) protocol and successfully view Channel 1 (I have 4 channels/cameras). However, even if I change the Channel in the TinyCam settings to 2 or 3 or 4, it will only display channel 1 when using Snapshot protocol. But viewing channel 1 with that protocol does work in TinyCam.
When using the RTSP over TCP protocol "Camera status" in TinyCam shows as OK, however, it's not getting a feed on LAN or WAN and will timeout.
Any suggestions? Even if it's revert to the old firmware and tell me how to clear the upgrade firmware dialog box from always appearing on my screen, I'm willing to do that, as well. I just want it to work like it did before the upgrade. Thanks in advance!
My TinyCam settings should be fine as they worked prior to the firmware upgrade and had for the last 3.5 years that I've owned the system. I can switch protocols from RTSP over TCP to Snapshot (JPEG) protocol and successfully view Channel 1 (I have 4 channels/cameras). However, even if I change the Channel in the TinyCam settings to 2 or 3 or 4, it will only display channel 1 when using Snapshot protocol. But viewing channel 1 with that protocol does work in TinyCam.
When using the RTSP over TCP protocol "Camera status" in TinyCam shows as OK, however, it's not getting a feed on LAN or WAN and will timeout.
Any suggestions? Even if it's revert to the old firmware and tell me how to clear the upgrade firmware dialog box from always appearing on my screen, I'm willing to do that, as well. I just want it to work like it did before the upgrade. Thanks in advance!