I've just compared my Huisun recorded files against files recorded off a Hik 2732 and they're not that much different in size. I record in 10minute blocks so have typical file size of 250mb for the Huisun and 287mb for the 2732 per 10 minutes. Both are set to record 24/7.Hi
I have 2 cams, one Hik 2532 and this mini ptz v1. Both are configured in Surveillance station to record 24/7 limited 150gb per camera. The problem is that with mini ptz I get files of 9GB for 30min of recording instead of 900MB for the Hik!! Both are configured with 15 fps, VBR and 1920x1080...
Does anyone have the same issue?
Thanks
They light up based on the current zoom level.How do I get all 4 IR Leds to light up? So far only the bottom 2 are lighting up. As far as I can tell, this is the only setting that I can find. If this is the right place can someone please explain and suggest settings to power up all 4 IR LEDS? I had changed the mode to ON in my testing.
Thx for the response. So everyone that mounts these cameras on the wall has them run into the wall while doing a self test? Any idea on how to restore the right movement? It did its self test and now doesn't move right..No you can't disable self test, I've asked this as first feature with v1 8 month ago and was told it's not possible.
I mounted mine on the end of my fascia under the gutters and found it was going to hit the gutters when it panned right around either side or during self test so I mounted mine to a junction box as well to space it off so it's full movement. I'll try to get a picture if I can get home tomorrow before dark to show what I mean.Thx for the response. So everyone that mounts these cameras on the wall has them run into the wall while doing a self test? Any idea on how to restore the right movement? It did its self test and now doesn't move right..
Thx
Eustace..