Thanks guys. I'm still struggling to get the camera listed in the app.
The Search Device dialogue actually says "Operation failed. The device is not supported. Retry. IMHO I think it's strange to retry if the device isn't supported. What would make it supported by trying additional times. Anyway, I usually succeed to make it find my device ID after many attempts.
I've e-mailed them. When I phone the number they've provided +1 833 236 6561 there's a message that the number has nu subscriber (not in use)
Thanks. Yes, I've tried that too.
Thanks. Sure I've found that button and pushed it 10 seconds and released it when the blue lights starts flashing. It speaks "Reset sucessfully" so I guess it's reset properly. It allows me to reconfigure it.
Something that I noted when reading the installation instruction in my app (not the one printed on paper) is that when connecting without a chime (like I do) you should not feed it with AC power but rather with
DC power at a voltage of
8-24 Volt. I decided to try that and it works fine on 9VDC and it consumes 1.23A (About 11W). I see no change in behavior at all. If I knew that initially I wouldn't have had to buy an AC transformer! I already have some DC Power supplies in my drawers.
View attachment 46185
I'll go over to my neighbor and see if I can Install it properly using his router...
EDIT: I've got the exact same problem also when trying to register the device at my neighbours house (using his router of course). I also tried using my neighbours iPhone to register the Camera. The iPhone app had an extra step (connecting to the cameras wifi as well). However it ended up with the same problem. Camera connects to the Wifi but won't get listed in the app afterwards.