The DB11 does not have a web UI as stated on the datasheet and Wiki, however some parameters can be tweated using the SmartPSS client software which can be download here, though I would be careful doing this as it's an unsupported feature. Changing some parameters may have undesired results, using the Imou app is the only supported method.Using the IP address assigned I can't open a web UI. However it works on the IMOU app. Yet I can't find any config details on the IMOU app itself.
The DB11 is intended to be connected using the P2P feature and serial number (QR barcode) as described here. It's also possible to connect using the private port 37777 though you may need to manually create the stream profile.Another new issue is now I can't even get the DB11 added to any config tool or the NVR. It is being found if I search by Mac address (wrong on the sticker BTW) but the TCP port is always 0.
I am interested to get your feedback on the firmware upgrade, was it successful?I'll try it tonight if I get a chance
Haven't got to it yetI am interested to get your feedback on the firmware upgrade, was it successful?
It will be more than adequate (it looks like a typical CCTV power supply for analogue PTZ cameras)
I lost connection on the weekend. Tried resetting but it's not working. Power and blue light is there but not reset and hotspot to connect.It worked fine connected to transformer in the past. And transformer still works with my dumb doorbell and mechanical chime. The house is only 16 months old so I doubt it has partially failed in that time.
Another new issue is now I can't even get the DB11 added to any config tool or the NVR. It is being found if I search by Mac address (wrong on the sticker BTW) but the TCP port is always 0. And using the IP address assigned I can't open a web UI. However it works on the IMOU app. Yet I can't find any config details on the IMOU app itself.
The DB11 will only connect to a Dahua NVR through the proprietary protocol on port 37777.Can someone please inform if they have this working on a non Dahua recorder and what issues (if any) there are getting it working.
Were you able to upgrade the DB11 firmware successully?I'll try it tonight if I get a chance
I havent got around to it yetWere you able to upgrade the DB11 firmware successully?
Were you losing wifi signal and cutting out when ir came on? That's my problemJust FYI, I ran into an issue today with what I think was my SD card causing boot issues (just formatted it and am about to put it back in).
But, in trying to solve it, I ended up flashing the firmware. The Dahua Wiki no longer has a link to the 12/2/2019 version of the firmware, only the 10/14/19 version. Once I flashed the 10/14/19 version via ConfigTool, on reboot, the Imou app told me there was a firmware upgrade available for my device and it is the 12/2/19 version.
Just flashed that version and everything appears to be working. I'll mess with the image settings in ConfigTool later and see if my IR switch problem has been resolved.
Excellent feedback. Unsure why the Dahua Wiki page is using the old firmware file, the newer file (R.20191202) can be downloaded from here. Futhermore, I am curious to why they haven't pushed this firmware update through the Imou mobile app which is still using (R.20180919) as the latest which is well over a year old. It seems that Dahua have created a new software branch for the LincX2PRO consumer series, how that differs from the Imou software would be interesting to know (or perhaps they are just cautious about pushing firmware updates)...., I ended up flashing the firmware. The Dahua Wiki no longer has a link to the 12/2/2019 version of the firmware, only the 10/14/19 version. Once I flashed the 10/14/19 version via ConfigTool, on reboot, the Imou app told me there was a firmware upgrade available for my device and it is the 12/2/19 version. Just flashed that version and everything appears to be working.
Simply use the Dahua proprietary protocol on port 37777 - same as any other Dahua camera.Wondering if anyone got this doorbell to work on a Dahua NVR? If so what configuration did you use?
Yes mine is on my NVR but I think video only. Just added the camera IP address on my network as a channel and put in the proper user/pass and it loads right up.Wondering if anyone got this doorbell to work on a Dahua NVR? If so what configuration did you use?
Thank You
Mike