Hi All
I have read multiple threds on this forum, and watched videos showing how to configure Auto Tracking on dauha SD59225U-HNI. It all comes downs to that people recommends that you just try to play with it in order to make it work properly. I've tried alot, yet still the Auto Tracking often get totally confused. And i Don't know why.
This example is an IVS intrusion, Action Cross, Direction both rule. Tracking is set to 300sec.
Target filter max size: 1697x2689, min size: 243*519
I believe it should be pretty clear to the algorithm what is moving in the image hence it should follow that. I suspect the car is driving to fast for the camera, as it gets confused.
In IVS global at the NVR there is something called calibration, I get find such thing in the webinterface directly on the camera. Would it help to configure calibration on the NVR IVS global for that channel?
If you have any advise how to make it work properly it would be appreciated.
Thank you.
I have read multiple threds on this forum, and watched videos showing how to configure Auto Tracking on dauha SD59225U-HNI. It all comes downs to that people recommends that you just try to play with it in order to make it work properly. I've tried alot, yet still the Auto Tracking often get totally confused. And i Don't know why.
This example is an IVS intrusion, Action Cross, Direction both rule. Tracking is set to 300sec.
Target filter max size: 1697x2689, min size: 243*519
I believe it should be pretty clear to the algorithm what is moving in the image hence it should follow that. I suspect the car is driving to fast for the camera, as it gets confused.
In IVS global at the NVR there is something called calibration, I get find such thing in the webinterface directly on the camera. Would it help to configure calibration on the NVR IVS global for that channel?
If you have any advise how to make it work properly it would be appreciated.
Thank you.