Smart illumination not working on new Dahua TiOC Camera
- Thread starter Kani
- Start date
bigredfish
Known around here
Show video example of what you mean. ?
BTW- not advisable to run BOTH SMD and Tripwire simultaneously.
BTW- not advisable to run BOTH SMD and Tripwire simultaneously.
yes, that is exactly the issue,
Light not flashing when someone comes into field. 3 out of my 6 8MP Cameras are workig fine. I tried enabling the smart illumination from the DMSS app (photo attached) as well as via the NVR. but no luck.
Attachments
Do not do any settings in DMSS app or the NVR.
You need to do it in the camera itself. The fact that is works with the other ones if set up the same way is simply luck.
To get into the camera GUI from the NVR, you need to first access the NVR GUI by going to a computer and opening up a browser (preferably Internet Explorer but Pale Moon will work as well) and type in the IP address of the NVR and login that way. Next go into the camera settings page on the NVR and look for the Microsoft e Web Browser and select it and it will go to the camera GUI (photo credit bigredfish from his PSA thread). Your screen may look a little different to get into the camera gui and see if doing it this way gets you access to some other features the NVR is blocking - do not worry about the Port number and circle as that was from another issue someone posted.
You need to do it in the camera itself. The fact that is works with the other ones if set up the same way is simply luck.
To get into the camera GUI from the NVR, you need to first access the NVR GUI by going to a computer and opening up a browser (preferably Internet Explorer but Pale Moon will work as well) and type in the IP address of the NVR and login that way. Next go into the camera settings page on the NVR and look for the Microsoft e Web Browser and select it and it will go to the camera GUI (photo credit bigredfish from his PSA thread). Your screen may look a little different to get into the camera gui and see if doing it this way gets you access to some other features the NVR is blocking - do not worry about the Port number and circle as that was from another issue someone posted.
Thank you , but no luck !!!Do not do any settings in DMSS app or the NVR.
You need to do it in the camera itself. The fact that is works with the other ones if set up the same way is simply luck.
To get into the camera GUI from the NVR, you need to first access the NVR GUI by going to a computer and opening up a browser (preferably Internet Explorer but Pale Moon will work as well) and type in the IP address of the NVR and login that way. Next go into the camera settings page on the NVR and look for the Microsoft e Web Browser and select it and it will go to the camera GUI (photo credit bigredfish from his PSA thread). Your screen may look a little different to get into the camera gui and see if doing it this way gets you access to some other features the NVR is blocking - do not worry about the Port number and circle as that was from another issue someone posted.
Mark_M
Getting comfortable
Can you show a picture from the camera's video at night?
I find my TiOC's only turns on to IR/white light when it's very dark.
I find my TiOC's only turns on to IR/white light when it's very dark.
