Hi all, hope this is the right thread for this.
Not sure how this happened, but I have a Hikvision NVR Model DS-7608NI-I2 / 8P running version V3.4.93 firmware that has been assigned an IP on my home network of 192.168.20.42, however, the 3 x IP cams I have attached to it are on a different IP address range which is 128.100.0.2, 12, and 4...
I am not well versed in this, but why are the cameras not being assigned IP addresses in my home LAN so I can access the cameras individually using the 192.168 IP range.
It appears to me the 3 cameras seem to be behind the NVR, this might be the better security option but it prevents me viewing the stream of the cameras unless I use the RTSP strings.
How do I go about getting the NVR and cameras to each have there own IP address on my Home 192.168 LAN range.
Is there a simple way to set it up or change a setting in the NVR that allows me to have the NVR stay at 192.168.20.42 (have got this set on a static IP) and the cameras on 192.168.20.XX etc.
As I said, I'm very new to all this, so any help would be appreciated. Apologies if I have not explained myself well. I may not have some of the terminology right.
I got this setup at a good price (older cameras and NVR with old GUI it seems), and have it up and running, just not the way I'd like.
Not sure how this happened, but I have a Hikvision NVR Model DS-7608NI-I2 / 8P running version V3.4.93 firmware that has been assigned an IP on my home network of 192.168.20.42, however, the 3 x IP cams I have attached to it are on a different IP address range which is 128.100.0.2, 12, and 4...
I am not well versed in this, but why are the cameras not being assigned IP addresses in my home LAN so I can access the cameras individually using the 192.168 IP range.
It appears to me the 3 cameras seem to be behind the NVR, this might be the better security option but it prevents me viewing the stream of the cameras unless I use the RTSP strings.
How do I go about getting the NVR and cameras to each have there own IP address on my Home 192.168 LAN range.
Is there a simple way to set it up or change a setting in the NVR that allows me to have the NVR stay at 192.168.20.42 (have got this set on a static IP) and the cameras on 192.168.20.XX etc.
As I said, I'm very new to all this, so any help would be appreciated. Apologies if I have not explained myself well. I may not have some of the terminology right.
I got this setup at a good price (older cameras and NVR with old GUI it seems), and have it up and running, just not the way I'd like.