I recently revived an older BI server that was in storage -- was workign fine for years. On windows 10, the hardware, while old, is more than capable -- an intel 6950x, 64gig ram, paired with a 1080ti. I'm running 9 dhaua cameras, with 4x 18tb barracudas.
I updated BI to the latest, found the cameras with no problem, but every night -- around 9 or 10, sometimes a little earlier, sometimes a little later, there's a blank spot in the recording time that lasts 1-3 hrs. BI will be running fine, just nothing recording.
The drive it's saving to is fine. Quoatas are disabled. the cpu ius running at around 30% load.
Any ideas?
I'm likely going to just do a fresh install, but any thoughts appreciated.
I updated BI to the latest, found the cameras with no problem, but every night -- around 9 or 10, sometimes a little earlier, sometimes a little later, there's a blank spot in the recording time that lasts 1-3 hrs. BI will be running fine, just nothing recording.
The drive it's saving to is fine. Quoatas are disabled. the cpu ius running at around 30% load.
Any ideas?
I'm likely going to just do a fresh install, but any thoughts appreciated.