1.21 jiggawatts!'s latest activity
-
11.21 jiggawatts! replied to the thread URGENT!!! There will be new DMSS 2.0 and new cloud account mode & new cloud video streaming.With this version, is there the ability to choose where the dmss stores saved photos and video recordings on the phone? My dmss install...
-
11.21 jiggawatts! reacted to steve1225's post in the thread Dahua AI NVR algorithm updates? with
Like.
only single file, they have AI update inside... only 5xxx-S2 and 7xxx-X have 2 stage firmware update system (2 separate file update)... -
1Do Dahua AI NVRs need algorithm updates, just like the 5442 series cams do, where you have the firmware update in 2 parts, main firmware...
-
11.21 jiggawatts! replied to the thread Dahua NVRs channel zero.Viewing zero channel on gdmss will change the video output on the actual NVR to show all channels of the nvr on the output screen, even...
-
11.21 jiggawatts! replied to the thread rapidly alternating between day and night profile at sundown? 5442 series.if dahua doesn't want to use LDR/photo resistor because of cadmium sulfide affecting ROHS, they should use a photo transistor or photo...
-
11.21 jiggawatts! reacted to steve1225's post in the thread rapidly alternating between day and night profile at sundown? 5442 series with Like.
you can do a difference - but not that big... ps. I don't like timetable changed manual profiles - they work bad in spring and autumn...
-
1on my NVR5216-EI, there is a quick search feature in the playback window. you can filter between human , vehicle and animal. when trying...
-
11.21 jiggawatts! reacted to steve1225's post in the thread rapidly alternating between day and night profile at sundown? 5442 series with Like.
If You use automatic day/night switching then difference in Your day and night settings (shutter & gain) are simply too big. shutter is...
-
11.21 jiggawatts! replied to the thread rapidly alternating between day and night profile at sundown? 5442 series.So basically, make sure the daytime exposure and shutter settings are not smaller than the night settings unless using a schedule. I'm...
-
11.21 jiggawatts! replied to the thread rapidly alternating between day and night profile at sundown? 5442 series.it's actually changing profiles. if i refresh the webpage at the correct time, i can see that it has gone into night.
-
11.21 jiggawatts! posted the thread rapidly alternating between day and night profile at sundown? 5442 series in Dahua.i have followed the advice i've seen in some threads of manual exposure settings on the daytime profile instead of the automatic...
-
11.21 jiggawatts! reacted to Mike A.'s post in the thread IPC-HDW5442T-ZE S3 strange audio electrical noise with Like.
Yes. Gargling underwater. lol That's the usual noise which is why I asked.
-
11.21 jiggawatts! replied to the thread IPC-HDW5442T-ZE S3 strange audio electrical noise.I just ordered a tp link TL-SG1005P. When I eventually go back to site I'll hook up the 4 cams to it and see if it helps.
-
11.21 jiggawatts! reacted to steve1225's post in the thread IPC-HDW5442T-ZE S3 strange audio electrical noise with Like.
Full WDR (>=45) triples how many shots are done by camera (3 per each video frame). Also increases a lot image processing by SOC...
-
11.21 jiggawatts! replied to the thread IPC-HDW5442T-ZE S3 strange audio electrical noise.Yes. Also using AAC on highest setting. The noise filter is awful. Sounds like the cam is underwater. Lol.
-
1i have 4 IPC-HDW5442T-ZE S3 that exhibit a strange audio noise, all day and night long, across different firmware. i've done plenty of...
-
1Yes. Each IVS rule can be independently specified. yes you can have them overlay each other.
-
11.21 jiggawatts! replied to the thread IVS Rule - Intrusion Details.Can you overlay intrusion areas on top of eachother? Say I want to cover the same area but I want detection sensitivity or action to be...
-
11.21 jiggawatts! replied to the thread 5442 S3 series cams and SMD.just an update, i factory reset, reinstalled firmware, factory reset the nvr and started from scratch and the issue persists. a possum...
-
11.21 jiggawatts! replied to the thread 5442 S3 series cams and SMD.I did for the current firmware but they don't have the old firmware. I only tried the old firmware on one cam.