Bruce_H's latest activity
-
BBruce_H replied to the thread What does this mean? Are there people connecting to my Blue Iris?.Is it possible that it might be a honeypot site!
-
BBruce_H replied to the thread Camera Triggered by Floating Artifacts.Fog also shows up as floating specks, it also looks like a snow storm!
-
BBruce_H replied to the thread Windows 11 - Powerup after Losing Power?.If the UPS is only running half of the estimated run time, I would recommend replacing the batteries. As far as replace batteries or a...
-
BBruce_H replied to the thread Windows 11 - Powerup after Losing Power?.There are some setting in the APC software that allow you to change how low the UPS battery will get before it preforms a shutdown! I...
-
BBruce_H replied to the thread Windows 11 - Powerup after Losing Power?.Do you have the APC backup connected to your BI PC with the supplied interface cable, if not then it may not shut down gracefully and...
-
BBruce_H reacted to jrbeddow's post in the thread Alert Actions won't fire with zone A to B motion. with
Like.
Yeah, I have had this type of problem for ages, and the conclusion is that the action sets don't work exacty like the... -
BBruce_H replied to the thread Alert Actions won't fire with zone A to B motion..A possible way to get this to work may be to clone a camera and have separate zones on each one of the clones, rather than trying to get...
-
BBruce_H reacted to looney2ns's post in the thread h.view ip camera issues ( can see locally but not remotely) with Like.
You should NOT be doing any port forwarding, very dangerous to your network...
-
BBruce_H replied to the thread h.view ip camera issues ( can see locally but not remotely).I hope you realize the risk of having your camera on open ports to the outside internet! You have also publicly posted your internet...
-
BBruce_H reacted to looney2ns's post in the thread what made my PZT controls stop working in UI3 after some of the most recent updates with Like.
Working fine here on .36
-
BBruce_H replied to the thread what made my PZT controls stop working in UI3 after some of the most recent updates.Running 5.9.9.36 and PTZ is working fine in UI3 here also!
-
BBruce_H replied to the thread Cameras randomly dropping offline briefly.The settings for the FPS/Key values are done in the camera web interface settings, you need to set the "Frame Rate (FPS)" and the "I...
-
-
BBruce_H replied to the thread Cameras randomly dropping offline briefly.What is your network configuration, do you have a single POE switch or multiple, is any of the network traffic from the cameras being...
-
BBruce_H replied to the thread BI reported RAM bug?.From the BI Help file for version 5.9.9.25, does not say much, but does hint that it is a work in progress! The inception of a new...
-
BThis question comes up a fair amount. It is the reason why BI has a % adjuster so you can make it match if it drives you bonkers they...
-
BBruce_H replied to the thread BI reported RAM bug?.If you really want to drive your self crazy, you could start comparing the RAM usage shown in task manager also! Yes my Blue Iris...
-
BBruce_H replied to the thread Alert Tab AI.I would say that it would need to be checked as a trigger source!
-
BBruce_H reacted to CrazyAsYou's post in the thread Blue Iris is canceling AI alerts with "nothing found" when there was clearly something there. with Like.
Buy a cheap can of silicone spray, cover the camera lens/glass/IR lights with a cloth using one hand and with the other hand spray the...
-
BBruce_H reacted to jaydeel's post in the thread JSON request always redirected to html login with Like.
You cannot issue JSON calls to Blue Iris via an internet browser. Inspect and try the attached Powershell script to learn how to use...
-
BBruce_H replied to the thread JSON request always redirected to html login.What is it you are attempting to do, is the intent to try to bypass the login screen, if so for what purpose?
