Recent content by BYS

  1. B

    POE Splitter Recommendation

    NETGEAR 8 Port PoE Gigabit Ethernet Easy Smart Managed Essentials Switch (GS308EPP) - with 8 x PoE+ @ 123W Am running the above switch. I would like to run 2 Daiwa 5442’s without running 2 separate ethernet cables from the switch to each cam. So the idea of a 2 port splitter comes to mind...
  2. B

    Any need to ground camera mounted under eave?

    The climate in my area is it hardly rains (S. California) and the cam will be mounted under and eave. It wont get wet nor can I imagine lightening hitting it (albeit the casing is metal). Going by the book, seems I should ground it but, practically, is it necessary?
  3. B

    Any Idea how to get an IP cam working with a range extender?

    How do any of them deliver power to the cam? Arent we using POE cams?
  4. B

    Any Idea how to get an IP cam working with a range extender?

    Is it even possible? Tried with a Netgear range extender and a Trendnet injector. Both are known to be working. I set my cam with a static IP address. But seems the cam is being assigned a different IP address by the range extender. SI can't detect the cam with either IP address. I cant...
  5. B

    Good deal Annke 180 degree dual 1/1.8 for $220?

    Hi all, a very belated but very appreciative thank you for all your insights an tips. I have not installed the cam outside yet but tested it and am very happy with it.
  6. B

    Good deal Annke 180 degree dual 1/1.8 for $220?

    On the NCD800, were you able to get the mic working? I thought the cam has speakers and through BI (app and desktop software) I am hoping to speak to the cam. I got it workign the other way around (cam to BI desktp or app) only.
  7. B

    They'll Steal Anything -- December 14, 2024

    You don[t need a receipt to get a refund at HD. To him it's cash money.
  8. B

    RTSP server stream pixelates every 10 seconds

    I Googled and followed this guys steps - which are the same as yours - except I didnt disconnect audio in BI. Sound output form the cam works. But I cant get the mike to cam to work. Any ideas? "30hpX5M OP • 3y ago • I got it to work. The video drop down had a video + audio option and I clicked...
  9. B

    RTSP server stream pixelates every 10 seconds

    Thanks will give it a shot and report back!
  10. B

    RTSP server stream pixelates every 10 seconds

    You able to get the sound working on that through BI? If so, how? Thank you!
  11. B

    BI android app and push to talk

    So more than a year later. Any progress or incllination for BI to fix this?
  12. B

    Annke (Hiki) SADP Tool Help!

    Gents I was able to reset the PW using the SADP tool and contacting support. Flintstone, you sort of highlight an intersting problem. So the SADP tool assigned an IP address. I used the same in BI and the cam is up and running fine. Strangely, I cannot see the cam in my list of connected...
  13. B

    Annke (Hiki) SADP Tool Help!

    NCD800. I'd rather not hard reset and potentially brick it. Already emailed support.
  14. B

    Annke (Hiki) SADP Tool Help!

    Is the admin PW is in this software: 1) the same PW I gave it when I activated the camera? 2) if yes, its possible to have 2 admin PWs? In other words, the admin PW is actually the cam PW? The SADP tool is what I would use to change the IP address of the cam? Cant seem to get a new Annke set...
    • BYS
    • Thread
    • annke hikision sadp
    • Replies: 5
    • Forum: Hikvision
  15. B

    Good deal Annke 180 degree dual 1/1.8 for $220?

    What is the diameter of that circular mount? If no avaliable would you say its far wide than the circular for the Dahua 5442?
See more
Top Bottom