Recent content by cappedup

Work takes me away again. Ill try these things when i return. Thanks again TechBill.

Hmm, I also tried .200, which might have been its IP. Same deal. Could I potentially have a 2nd dodgy injector? I would like to eliminate that, but dont have a power supply kicking around for the camera. I am starting to suspect power surge. House is in an area that gets storms, although has...

Thanks Techbill. My IP properties box matches yours, yes. I was connected to wifi, well spotted. Repeated same test disconnected. My results from pinging .108 are the same as yours pinging .121. (with the reply now correctly from .10) If i ping .10 I get a similar result to you pinging .108...

Rebooted with gateway and DNS blank. Result from command console. (Pic) Says data is received, does that confirm the camera is responding? Although 'host is unreachable'.

Are you saying my settings for this are still incorrect? Forgive my amateur puzzling. Was reading another thread about a surge taking out a camera. Any way I can test for that?

Ah, I thought I was trying to match the ip's. Ok. So static ip of pc Ethernet is now .10 (pic) Did receive an error message before closing Ethernet properties box. (Pic) haven't manually changed any other network settings. Reset cam for 1 minute. PC Ethernet does acknowledge soemthing is...

I believe I've set my pc Ethernet card to have the static ip of the camera. Pic attached. Camera plugged into Ethernet port via injector. Reset camera by holding reset button while booting. Navigate browser to 192.168.1.108, assumed default ip of camera. Nothing. I'm wide open to ideas here.

Back for a few days. Wired as follows: Laptop ------> injector ------> camera What's the plan for manually accessing the camera? I'm not entirely sure what the ip address of the camera was. And I'm sure I've factory reset it anyway. In a few years time I'm certain these...

Going to have to park this problem for a couple of weeks. Away with work now. Thanks for the assistance. I'll crack it when I'm back.

Injector ruled out. New one out of the box, same deal. Tried finding the camera at the IP address it should have. I have another network I can try this camera and injector on. After that, I should try and connect another Ethernet device to this network, see if that device shows. Try and...

Yeah. Makes sense. Will report back. Thanks for the input.

I guess next thing is to try a new injector. Although this one seems to be doing everything it used to.

It's the adapter plug I can't find.... grr. Just factory reset router. No change.

Model is W-IPSD3282D sticker on back says input - 12v:2a The injector is TP-Link 48v. Wish I knew where the power lead was....

Pulled the camera down, swapped the ethernet cables either side of the PoE injector. Just the Ethernet connection has disappeared from the router. Not really sure what to check next. Tried different Ethernet ports. I use iDmss to access the camera, but that hasn't got anywhere to look. Can...