Recent content by crossStreet

Same here. It gets stuck uploading the same dav file again and again, even though it has been uploaded successfully before. If I remove the uploaded file, it does upload it again and keeps uploading it all over again. I had the problem on 215 firmware then on 216. Although on 216 at least it...

For extra glamour you can use black nail polish.

I am running this new firmware (216) and it seems to be fine. I've switched back and forth 215<->216 at least twice, so it should be all right for you to test it - you can revert back. From new features I've noticed secure ftp, which did not work for me. The main reason that I upgraded was...

Try downloading again maybe. Btw the bin file is actually a zip. If you change the extension to .zip you will be able ti verify integrity with WinRar or similar tools.

My NVR5216-4KS2 allows downgrading and I've done it a few times. Furthermore going from V3.216 to V3.215 did not require config restore.

For you it is sending test emails periodically. Untick Health Enable to disable that.

Another piece of advice: don't use your normal gmail account, but open a new one specially for the task. This way you are not going to compromise security by giving your password to a chinese company, that no-one knows what is capable for. You can set up forwarding to your normal account if you...

I send emails to gmail with pictures from the NVR (NVR5216-4KS2). Although it does not work very robustly - sometimes the emails do not have pictures attached. I've found it handy to setup a filter so that the emails get deleted on arrival. If I want the check something they are stored for 30...

I seem to have it working. If I manually set wrong time either on cameras on NVR, with time it gets corrected.

On my NVR (NVR5216-4KS2) it is certainly possible. You can set the PTZ to go to a preset on idle, and add a timed task to do a tour. Not sure if you can do this on the camera alone.

Did the brand new cable help? Just far fetched things to try: is your mains voltage within 10% of the norm? Don't you have devices with high interference by the cable?

Can you please explain why you need to sync time to NVR manually? Because my setup, which is sync NVR with NTP, and sync all cameras on a signal from NVR, seems to work fine. Thanks.

На всяукий случай задайте этот вопрос прямо продаву. Возможно это потом поможеть с возвратом, если каера сломается при прошивке.

Ваша камера IPC-HFW4233K-AS-LED не находится на сайте www.dahuasecurity.com Это значит что она хакнутая. Поэтому перепрошивать её не советую

Поэтому они добавлают всякие несовместимости.