Recent content by curtis-r

  1. C

    Blue Iris Long Delay with CodeProject Object Detection

    Very helpful links. Though I have 9 cams on my property, the one I'm most dependent on is at the street at our driveway. The critical footage would be 8'-25' and always involve motion, usually vehicles but also often people walking down our driveway.
  2. C

    Blue Iris Long Delay with CodeProject Object Detection

    I hesitate to ask in fear of this thread and my head exploding from answers to such a generic and subjective question, but is there a sort-of consensus of quality, but not crazy-expensive, cams that plays very well with Blue Iris?
  3. C

    Blue Iris Long Delay with CodeProject Object Detection

    SOLVED: Though there were a few moving parts to my issue, the main one that applies to this thread is that my two Reolink RLC-811A camera's sub-stream timeclock would drift over time, to the point where Blue Iris would receive that stream 10+ seconds after the event, thus leading to a...
  4. C

    Blue Iris Long Delay with CodeProject Object Detection

    If you don't have BI MQTT Reset and are monitoring MQTT outside of Home Assistant (such as MQTT Explorer), I suspect the initial alert would stay 'ON'. Of course this may not matter to anyone but probably safest to just have BI reset the MQTT to 'OFF'. But @actran I wasn't aware of the Home...
  5. C

    Blue Iris Long Delay with CodeProject Object Detection

    But then wouldn't that often be a false MQTT in the cases that AI doesn't confirm? Or are you just suggesting this as a test?
  6. C

    Blue Iris Long Delay with CodeProject Object Detection

    Turning off a bunch of cameras had zero impact. MQTT took 12 seconds after AI was done. CPU with only 3 cams active: 2%. CPU with all cameras active: 4-8%. Support @ BI wanted my .dat file, so we'll see what they have to say.
  7. C

    Blue Iris Long Delay with CodeProject Object Detection

    Specifying custom-models on the primary cameras did not help. Still taking 10-18 seconds after AI to MQTT. At least I'm down to 2 seconds for the AI process. EDIT: I'm going to try disabling the 8 other cameras that I'm not using MQTT on to see if it's a CPU thing.
  8. C

    Blue Iris Long Delay with CodeProject Object Detection

    CodeProject is on another box running Docker, and I think it's CPU load is reasonable. The PC running BI is AMD Ryzen 7 5700G, 16GB RAM. Can't imagine the hardware is causing the MQTT delay. The two cam's with the MQTT alerts are both duplicate cam's and I just realized on the primary...
  9. C

    Blue Iris Long Delay with CodeProject Object Detection

    I also have another cam with an MQTT alert with similar lag. Disabling other Actions didn't help. Still large delays before the MQTT's fire. Weird. ]
  10. C

    Blue Iris Long Delay with CodeProject Object Detection

    Changing the MQTT to "vehicle" didn't help. Only 2 seconds for the AI to process, but another 12 for MQTT. Damn.
  11. C

    Blue Iris Long Delay with CodeProject Object Detection

    On one hand, I'm thrilled at the possibility that I could get an MQTT a second or so after motion. I just need to get there! Anyhow, the MQTT is first in line. I'm going to change Required to "vehicle" only and see what happens.
  12. C

    Blue Iris Long Delay with CodeProject Object Detection

    So, much improved with everyone's help. If you see the AI data and the Log, it's <5 sec from motion for AI to confirm a vehicle. But why is it another 8 seconds before the MQTT fires? It is the first item for Alert Actions. Also, why in the global AI in the (grayed-out) custom models, I can...
  13. C

    Blue Iris Long Delay with CodeProject Object Detection

    So far a huge speed improvement. About 5 seconds for AI to process a trigger when it was well over 20 before. I removed the models I'm not interested in. But with ipcam-general AI, why all the red-circle 'X's when it returned >90% chance of being a vehicle? Objects clearly works...
  14. C

    Blue Iris Long Delay with CodeProject Object Detection

    Yeah, I just found the Docker custom-models director, and indeed all five it's been trying to use are there. Instead of deleting them, I wonder if specifying in each camera like this will work. BTW, thanks!
  15. C

    Blue Iris Long Delay with CodeProject Object Detection

    Thanks! Well that explains my confusion on all those .dat entries, and might explain my slowdown, but I haven't specified any models, and the custom model area is grayed-out.
See more
Top Bottom