Recent content by dartec

Now the camera is in a boot loop, it's not accessible by the webui. Can you please path the latest firmware, maybe this is a reason why cannot boot.

Still, the same error TFTP stops on the: Client 192.168.1.108:2574 root\pd-x.squashfs.img, Timeout Are you sure that file upgrade_info_7db780a713a4.txt is correct?.

With this firmware, TFTP stops with this message: Open TFTP Server MultiThreaded Version 1.64 Windows Built 2001 starting TFTP... alias / is mapped to root\ permitted clients: all server port range: all max blksize: 65464 default blksize: 512 default timeout: 60 file read allowed: Yes file...

I do have camera IPC-HDBW5231E-Z which looks to be a similar model to IPC-HDBW5231R-Z but with stronger IR. If you can modify this firmware to enable telnet I can check cat /proc/cpuinfo on it. Firmware link...

You were right telnet is working, result of the cat /proc/cpuinfo: ~ # cat /proc/cpuinfo Processor : ARMv7 Processor rev 5 (v7l) BogoMIPS : 1196.85 Features : swp half fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt CPU implementer : 0x41 CPU architecture: 7 CPU variant...

All cameras were purchased on aliexpress, I have purchased 8 of them. This mismatch in model version can be also explanation why zooming is not working from my recorder, I'm not using dahua recorder. I can zoom in and zoom out only from camera web page. This is link to aliexpress auction...

All labels on camera are showing that this is model IPC-HDBW5231R-Z, also it was purchased as model IPC-HDBW5231R-Z. Now I do not know what to think about whether someone has sold me a model IPC-HDBW4231R-Z as model IPC-HDBW5231R-Z, or there is any other explanation.

. Flashing was done with the success, camera is still working but still in system it shows as IPC-HDBW5231R-Z not IPC-HDBW4231R-Z

This is even more strange because all cameras were purchased as the model IPC-HDBW5231R-Z. Never the less I try to use last firmware given by you and it was flashed but no changes Result of TFTP: accepting requests.. Open TFTP Server MultiThreaded Version 1.64 Windows Built 2001 starting...

Sorry was too late, below you can find results of printenv: Ncat: Version 7.40 ( Ncat - Netcat for the 21st Century ) Ncat: Listening on 192.168.254.254:5002 gBootLogPtr:80b80008. NAND: Check nand flash controller v610. found Special NAND id table Version 1.36 Nand ID: 0x98 0xF1 0x80 0x15 0xF2...

I'm using windows and do not have printenv on it. Is there any way you can help me with this ?

Maybe this will give you more info what is wrong ? :)

When I try to use it I got this info from TFT and nothing more, a camera is restarting and operating normally without a firmware update. This is error message I have: In file root\failed.txt no info file is 0 size. After it window with Console.bat is black

I cannot access with the telnet on port 2300 or port 23, a port is closed:

Thx, I will try to go with recovery.