what about upnp. I dont use it, I dont have a static IP on the WAN and the external ports I use on my pfsense the forwarding to the cam are
not what is shown in the table below
will give a try when I return home. Can do remotely from vacation home, but access is via a homebrew WISP that can be sketchy sometimes and dont want to screw the pooch remotely.
yes I do have port forwards for rtsp on the HQ video feed and for gui access. It it not constantly streaming or hitting the gui. only when I remote in to see what's going on on the property.
i set http and https back, are there default ports for the server and rtsp? I dont recall as I changed...
BJ78
I am happy you got your cam working as well, It really is a good cam despite all this mayhem.
I am sad to report, in my case at least, that the crashing/lockup has continued, even after putting the GUI back on port 80. My solution, unless somebody comes up w something better, was to put...
Would have never made that connection!
Settings modified and will monitor stability. And report results.
Previous....
HTTP Port 8400
RTSP Port 8402
HTTPS Port 8401
Server Port 8403
Current....
HTTP Port 80
RTSP Port 8402
HTTPS Port 443
Server Port 8403
strange.
every day or so the unit takes a crap. Non responsive to ping or gui or ssh no reply to reboot via curl
and requires a cold boot
turned off "cross the detection line" as it was a new feature I enabled, made no difference
any ideas or just put on digital timer to reboot it daily
Happy Report! All went smooth as silk. Now I just have to manually input my config.
Took about 10 minutes start to finish. READING, READING, READING took a few hours, well worth it!!
!GRACIAS!
Oh this is great information THANK YOU
Should I change the IP to 192.0.0.64 and http port to 80 in the gui before starting the process or will that happen when tftp updater puts cam in min-system mode
I posted in the wrong thread so please forgive the dbl post!
Before I fix my cam I wanted to make sure I'm good to go and make sure I'm on the right track. I have a working DS-2CD2732F-IS, Chinese version the email no longer works but other than that it works as it is supposed to. It is stock...
Before I fix my cam I wanted to make sure I'm good to go and make sure I'm on the right track. I have a working DS-2CD2732F-IS, Chinese version the email no longer works but other than that it works as it is supposed to. It is stock firmware v5.1.0 build 131202 with a devType =38926.
#...