Recent content by exarkun

  1. E

    Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

    My NVR reports the same version as for WA3PNT is availbale. Found New Version:4.000.0000001.5.R.191206 New Features: 1. Brand new GUI4.0. 2. Better compatibility with SMD, and Primeter Protection camera. 3. No plugins required in Chrome, Edge, and Firefox 4. Color scheme, flat interfaces and...
  2. E

    Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

    My DVR received an upgrade notice for a different version: Found New Version:4.000.0000001.2.R.191101 New Features: 1. Brand new GUI4.0. 2. Better compatibility with SMD, and Primeter Protection camera. 3. No plugins required in Chrome, Edge, and Firefox 4. Color scheme, flat interfaces and...
  3. E

    Review-Dahua IPC-HFW1831C-PIR 4k Mini Bullet

    Is this the latest FW for this camera? http://dahuawiki.com/images/Firmware/DH_IPC-HX2X3X-Rhea_MultiLang_NP_Stream2_V2.800.0000010.0.R.190807.zip
  4. E

    Lorex

    FYI, there is newer Lorex firmware for the LNR616x out now. I have not tried it yet (still using dahua NVR5XXX FW) https://dahuawiki.com/images/LX/Firmware/LNR616X_20190625_00009.bin No idea on the changes. All it says is "P2P remote access connection enhancement"
  5. E

    Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

    Any additional confirmation this really was pulled? Any idea on a new release/version?
  6. E

    Review-Dahua IPC-HFW1831C-PIR 4k Mini Bullet

    I haven't seen conduit used with this type of camera. What's the proper method for a camera like this where the mount is right by the cable? Are there an installed examples? Will the camera be adjustable? TIA
  7. E

    Review-Dahua IPC-HFW1831C-PIR 4k Mini Bullet

    Any suggestions on how to mount these cameras and protect the cables from tampering?
  8. E

    Lorex

    The firmware he linked is not at that wiki
  9. E

    Lorex

    So I had a lot of fun here, but have it working with Dahua FW now. I first tried the latest version (DH_NVR5XXX-4KS2_MultiLang_V3.216.0000006.0.R.20190223) After I upgraded it via TFTP, it would boot loop. So I disabled "dh_keyboard" so I could watch the OS boot and it would hang during OS...
  10. E

    Lorex

    Those are the instructions to install if you have an "upgrade.img" file. I do not have that for the lorex firmware, I have LNR616X_20180628_00003.bin which, once extracted, gives: 575S_PMX.bin.img custom-x.squashfs.img logo-x.squashfs.img romfs_slave-x.squashfs.img romfs-x.squashfs.img...
  11. E

    Lorex

    To install the dahua firmware, it is upgrade.img. The directions for tftp firmware installs are also with upgrade.img There is no upgrade.img inside the .bin How do I use XXX.bin?
  12. E

    Lorex

    Thanks for the additional info. I had already extracted the .bin and found NVR5XXX-4K in the same file you mentioned TheDude Is there a way to use the .bin file or the contents of it to flash the NVR with the Lorex firmware if something doesn't work out with the dahua firmware? not now...
  13. E

    Lorex

    Minor update. I booted the NVR with the serial port hooked up. Interrupted the boot and everything is pretty much the same as mixmansc has in his post. I haven't tried updating the comparable Dahua firmware yet as I would like a backup copy of the Lorex firmware, just in case. Does anyone...
  14. E

    Lorex

    To get the "dahua" camera to work, I just had to remove power, remove the cover on the top of the camera that has two screws holding it in, then hold in the reset button for a bit while powering it on. After that, power it up on the LAN, see what DHCP address it received, and login with...
  15. E

    Lorex

    I recently purchased this lorex kit from Costco. It consists of an NVR (Lorex model LNR6164T/LNR616X) and 9x cameras (Lorex model LNB8105X - re-badged/crippled Dahua model IPC-HFW1831C-PIR) I powered the NVR up and tested all the cameras to make sure everything was in working order before...
Top