Recent content by ey33

@3lij4h the pfb203w mounted to the pfa151 will require some minor modifications. You will have to drill and tap to mount.

@3lij4h If you look back to post #83 and #84 by @nymphaeles in this thread, you will see the way the cam is mounted. As far as mounting the mounting the pfb203w to the pfa151, if the pre drilled holes are not correct, you can simply drill and tap the new holes. After checking out the location...

when you mouse over Default Group, are you mousing over the arrow? If so, it will not work. Try mousing over the letters of "Default Group" then, quickly double click. Other than that, that's all I can think of. edit. click many time quickly (while mouse over on "Default Group" letters) until...

Just trying to make sure you didn't have a defective mouse. It is showing the two channels. When i double clicked just the cam, it open up cam one again like you. Try quickly double clicking Default Group.it's the only way it will show up for me. I've opened it over a dozen times now. If it is...

in smart pss on the top right, click on the gear icon. under the device manager , check show device channel number, and save. then open devices tab and look for the column that shows channel number and see if this is what you are getting.

I've tried it over ten times to make sure it works and not a fluke. When I double click the "Default Group", even though the menu drops down or collapses, as long as I quickly double click, the two cameras show up. Maybe you can check your mouse settings on your computer to see. (It's just...

Perhaps you are not clicking fast enough? If you say the "cam" disappears, it could be possible that you are not double clicking fast enough?

not the exact setup, but trying to give you an idea of how far it will stick out to see around the corner.

@Haas-Cam Sorry, but I have to ask, are you sure you are double clicking? Everytime I double click (whether expanded or collapsed) it has worked for me.

and (pfa151) This is what I was planning to use on my next project.

I am using win10. Try double clicking on pc drop down

@Haas-Cam Go to : Live View On the left pane, double click the "Default Group" drop down menu tab. Camera # 2 will show up. However, if you have other camera in that group, the results might not be what you expect. If you have other cameras listed in the default group, they will show up at...

Um...Seems to be a glitch in the camera UI or maybe in the nvr5216-4ks2? I able to see the rules on the screen for both channels but the rules only work on the last saved Smart Plan. When you change the camera channel display, the rules disappear from the one that wasn't save last. ie. Save...

Hi guys, I have it sorted now. You have to log into the camera directly and set from there. Thanks.

@looney2ns or @Arjun Are any of you having issues with setting up ivs or intrusion zones on channel 2? I am able to set up both on channel 1. Everything is working fine on this channel. I can draw and save the rules on channel 2, but it does not show up or work on channel 2.