Recent content by fernandombc

  1. F

    Dahua Firmware Mod Kit + Modded Dahua Firmware

    Hello, no I wasn’t able to get any code on the PuTTY, but the serial port/usb device, has communicated with the Vto.
  2. F

    Dahua Firmware Mod Kit + Modded Dahua Firmware

    Hello all, I have a VTO2111D-WP which after a firmware update via VDPConfig was bricked. I suppose the bootloader is corrupted, because after several attempts explain in this forum to recover the VTO, I´ve never achieved success. The last try,I use de NCOM and the TFTP Server method explained...
  3. F

    VTO2111D-WP bricked, won't recover

    I`ve tried the LAN network connection, but that is not working. So, I think that I need to connect the VTO to a PC with CP2102 USB to UART bridge, and my question is how can I identify in the VTO motherboard the serial port location and the correct pinout. The file VTO MB.docx bellow, contains...
  4. F

    VTO2111D-WP bricked, won't recover

    Hi, perhaps my problem is to setup the UART. What do I need to establish the connection between the VTO and the PC? I assume that to achieve a correct UART connection, I will need to have a special interface and make a correct wiring setup. So far I`ve connected the VTO to the PC via RJ45...
  5. F

    VTO2111D-WP bricked, won't recover

    Hello, I have the same problem with my VTO (bricked after firmware update). I made all the double routing config and updated the commands TXT file as described above, but when I run the TFTP server and Console, I get the following messages in the last line of the respective window, and thats...
Top