Well that was fun! Managed to manually run the commands with a bit of stuffing around to get the files transferred. Now running a 5.4.5 full english and working perfectly on the 7608ni!! Thank you and much appreciated alastairstevenson
Sure did! I thought this unit was destined for the bin.
That was my next step with brickfixv2 but was getting stuck booting into min-system mode. It would just pause after the reboot. Any ideas?
Camera is bricked and does not get the 192.0.0.64 address to reflash. I am able to get into uboot but do not have the process to rewrite a firmware and reload. Is the hardware broken or can it be recovered?
Sorry but i cannot remember what i previously did to get it to this state. This is a CN...
I have had offline network abnormal and parameter error. When connecting a laptop to the same network the camera pings for about 30secs then drops. After that this is the behaviour seen
4 bytes from 192.168.254.2: icmp_seq=359 ttl=63 time=1.630 ms
Request timeout for icmp_seq 360
Request...
Will have to check the hdmi interface for poe status. Link lights do not go out just no activity. No access via virtual hosts, camera goes offline. Will reconnect direct to nvr to get you the exact message.
Hi all,
Have the mentioned equipment . 2132 is a cn model with brick fix applied and patched up to 5.4.5 build 170123.
Issue i am having is the camera drops out when connected directly using the nvr poe ports. When connecting via a separate poe switch across the network the cam does not drop...