Recent content by Gemo

I am very happy happy happy, now i can try IVS The problem is i have the wrong version ConfigTool. Everybody thanks very much for the help!!!!!

The zip files i have are comming from Andy and i load the whole zip into Configtool and when i put in the password and click on extract the triangle comes behind the IP adress and i can go any further. Again one camera to factory reset, reboot and initialize, after that i try Configtool with the...

Also did a factory reset on one camera and tried to update the DAT file but still no result again the triangle behind the IP adress. If someone has a cloe i really appreciate it.

I have tried one camera after default and reboot, nothing happend only a triangle. On the piture the nvr is green en the camera's are red, is this normal? There is also a english version, the one i haven is in english totaly different. Can someone give me a link? Me chinese is even worse than...

Thanks everyone for today, tomorrow i will try to set camera's to default and reboot again.

I now if you look into the zip you see the serienumber of a specific camera.

Thanks for fast replay My camera's are connected to Dahua POE switchbox, and the switchbox and the NVR are connected with the LAN switchbox. I disconnect one camera and the NVR and try to update the other camera with the (ZIP) DAT file. First enter password, select camera and upload the entire...

I recieved my DAT files after 5 day's. And now i have a problem. I select first default and reboot the camera and now the configtool gifs a triangle when i extract the ZIP file. My steps: Pasword, select IP adress, load ZIP file, extact ZIP file, and then the triangle is showing. The 2 camera's...

The first set are 2 camera's and a NVR. Order by Andy: 2 ps. 4MP IPC-T5442TM-AS 1 ps. NVR5216 Others: 2 TB HDD 8-port Dahua POE-switch Cat6 cable Greetings from the Netherlands Gemo