Hi Andy, currently have dedicated pc + vms software & 5 x hikvision cameras. want to replace with nvr/dahua cameras or dedicated pc + blue iris & dahua. Price delivered to UK please all in white. I may buy 2 cameras to start to make sure its a improvement over my current hikvisions.:-
1 x...
Alastair could you tell me in idiots speak what those 2 locations are please 0x0C and 0x8000C
I have HxD open but havent a clue which 2 parts to check
thanks
unfortunately not, i made the changes i stated above, logged into the gui and it was in english :) but then i updated to 5.3 from the european site and its pinging and showing in sadp but it says min-system again and the actual browser screen is still showing rebooting but its been showing that...
Sorry back again, my checksum has changed after i changed the above. The checksum i enter into 0x64 and 0x65, is this the checksum before i started this, or after all of the changes i just done please?
Ah re you saying take the reading from 0x09? i get it. ok I think i am done, i will update to 5.3 to 5.4 to 5.4.5 fingers crossed and thanks a lot for the help, appreciate it
ok it was the installation that was the issue. was fine after cleared out everything and reinstalled.
ok hopefully almost there, i have took a temp copy of mtkblock6 and have changed the language to 01, i have my devtype (38920) which is 9808 in hex, i have looked at the 2322 modded pic and can...
idiot, the problem with SADP was winpcap wasnt working correctly. now sorted. can see the camera's and can see the camera has rest to 192.0.0.64, so now i should be able to just do the enhanced mtd hack?
appreciate the patience
Weird, I uninstalled 3.0.0.9 and restarted, reinstalled 3.0.0.10 the latest and its doing the same thing. I initially set these camera's up with this tool so i dont understand whats happened.
On opening it says "hint" initilization failed and then opens up into the SADP tool and no camera's...
Hi
it was SADP 3.0.9, so i have downloaded the latest .10 version, will let you know how it goes. AV is built in defender only and i ran as Admin.
Just restarted again so will let you know once its back online. in the meantime i have perm unplugged 1 of the 2 cams that arent working just in...
I have SADP installed but it doesnt detect any Camera's and i have 5 in total, 2 of them i patched before realizing and both of them are not showing, they have both had the brick fix ran, restarted then the downgrader and again both restarted but now i cannot ping or telnet.
inside the SADP...
Ok i tried it on a different pc and it went ahead. applied update (in only about 2 minutes) ishut down tftp and restarted the cam, but now it wont even ping.
So i tried the fix tool again and it done exactly the same, i rebooted and then ran the 5.30 downgrader and again it was successful but i...
Hi Alastair, the tftp started transmitting, but i am just getting "resend required" in the tool.
Do i need to enter anything in the subnet mask/ default gateway when changing IP please