Recent content by hatoan

  1. hatoan

    Hikvison E3 and gaining access to /bin/sh | find key unpack, repack.

    Exactly, CAM E3 platform is running a minisytem. [ERROR][MIN]MOUNT: mount app primary partition failed! [ERROR][MIN]MOUNT: please format and re-mount. [ERROR][MIN]MOUNT_APP: mount app failed! route: resolving ================================================ = !! the minisys is used for [...
  2. hatoan

    Hikvison E3 and gaining access to /bin/sh | find key unpack, repack.

    How to build sec.bin to E3 platform with my u-boot version.
  3. hatoan

    Hikvison E3 and gaining access to /bin/sh | find key unpack, repack.

    I have ... HKVS # printenv bootargs=console=ttyAMA0,115200 bootcmd=loadk;bootm baudrate=115200 ipaddr=192.168.1.64 serverip=192.168.1.128 netmask=255.255.255.0 bootfile="uImage" filesize=1598 fileaddr=81FFFA90 bootdelay=5 stdin=serial stdout=serial stderr=serial verify=n mdio_intf=rmii...
  4. hatoan

    Hikvison E3 and gaining access to /bin/sh | find key unpack, repack.

    I bought IP CAM Hikvision DS-2CD2T21G0-1 and I have information as: + Production Name: DS-2CD2T21G0-1 + Platfrom: E3 (Download Firmware). I have update down firmware 5.5.4 . + Uboot -version and function. + DUMP Nand flash chip w25n01xxIG - file_dump, Log dmesg and It give info of...
  5. hatoan

    G0 baremetal app for a limited u-boot ver

    I want to run command of os or /bin/sh. and I do along GUI. * run go -> load sec.bin on memory as picture 0x81fffa90. after run command * go 0x81fffa90 (comand is not hapenning any thing...) Info uboot version and command: and I dump Nand 128MB to find key unpack firmware. I have use...
  6. hatoan

    G0 baremetal app for a limited u-boot ver

    I want load sec.bin and run sec.bin, seem as command `go` notworking: Is any way other run command ?
  7. hatoan

    [MCR] Hikvision packer/unpacker for 5.3.x and newer firmware

    How I can send you!
  8. hatoan

    [MCR] Hikvision packer/unpacker for 5.3.x and newer firmware

    I have Hikvision Cam DS-2CD2X21G0. But I don't know unpack firmware. I dump 128MB from chip flash winbond. but i don't know where key was save. I have alot infomations from chipflash: .... The length of key must be less than or equal to 16! Error! efuse write key time out! Error! efuse load...
Top