Recent content by intelcom

  1. I

    Dahua DHI-NVR5864-4KS2 not support custom protocol

    Hi to all. The way that I did it was One by one firmware step back. But I know from my distributor that any DVR/NVR can’t downgrade to firmware lower than the original stock firmware that had when you order it. So if you have the DVR/NVR from 2020 you can downgrade until 2020. If you have it...
  2. I

    Dahua DHI-NVR5864-4KS2 not support custom protocol

    I manege to downgrade model NVR5216-4KS2 to DH_NVR5XXX-4KS2_MultiLang_V4.001.0000007.1.R.210827 and i can confirm that support Custom...
  3. I

    Dahua DHI-NVR5864-4KS2 not support custom protocol

    Did tou remember your previous Firmware? I have the same problem.. and i think maybe downgrade...
  4. I

    NVR5216-16P-4KS2E Latest new firmwre NVR5XXX-4KS2_MultiLang_V4.001.0000006.0.R.210208

    The Alarm Box Is what I ever wanted.... I already Connect 2 Alarmbox And now I have 12 alarm out for automation!!!
  5. I

    SSH Dahua

    Do you have any news for that???
  6. I

    Dahua IPC EASY unbricking / recovery over TFTP

    The problem are that i'm traying to downgrade a firmware but the doorphone is not access the upgrade_info_7db780a713a4.txt. Thanks.
  7. I

    Dahua IPC EASY unbricking / recovery over TFTP

    Anybody???
  8. I

    Dahua IPC EASY unbricking / recovery over TFTP

    And that is my faulty start... Uncompressing Linux........................................................................................................................ done, booting the kernel. Checking DDR......OK UBL Version: 1.46t(DM365)10:21:32 Oct 30 2018 Oscillator: 24MHZ ARM Rate...
  9. I

    Dahua IPC EASY unbricking / recovery over TFTP

    Hi, Can someone help me to fix the Commands.bat for my VTO? I have serial access and the printenv command give that: DHBOOT# printenv bootcmd=fsload;bootm 80800000 bootdelay=3 baudrate=115200 bootfile="uImage" single=0 da=protect off all;tftp 81a00000 dm365_ubl_boot_16M.bin.img;flwrite...
Top