Recent content by ipcami

Thanks for your response. I will turn off UPnP. I have tried several ethernet cables and also direct to router vs via a network switch and neither have improved the problem...

Hi, thanks @alastairstevenson. I plugged in a monitor to the VGA port. The NVR was showing the start up wizard (although it has already been setup via web interface). Appart from that nothing unusual. Not sure what you mean by the link detect light (do you mean the orange/green lights on the...

Hi All I have a DS-7608NI-SE/P NVR with a handful of Hikvision cameras. The cameras remain on the network rock solid but the NVR repeatedly and sporadically drops its connection to the LAN on a frequent basis (every day or so). I have run out of ideas as to what it could be, so far trying...

This link worked for me when I followed the steps http://www.forum.use-ip.co.uk/threads/tutorial-recording-to-an-sd-card-on-a-hikvision-camera.489/ Sent from my iPhone using Tapatalk

I will pull some through when I get the opportunity, will be useful for other things too I am sure!

Sorry, not sure I explained myself very well in original post. I am using a HIKVISION system with HIKVISION cameras but have registered them for viewing on the EXVIZ platform (https://i.ezvizlife.com) so that I can view footage without having DNS access to my NVR (which I am struggling to...

Washing machine on one occasion come to think of it (that could be a culprit!!)... not sure about the second.

I am at a loss. Tried again today with no joy. Software is the same across the cameras in question.....anything else I should check..

I have noticed I am now getting alarms pushed from the NVR to my phone where as I didn't before. The alarms are for video loss (on all three cameras) so think it likely that this is when the Powerline adaptor link goes down, when the link went down before this prevented the NVR from sending an...

I have re-sited the NVR next to the router now and plugged it in directly, seems to be a little better now but will monitor. Has anybody else had experience with using the HIKVISION IP camera system with TP Link Powerline adaptors where Ethernet access is not available.....?

I am in the process of registering my cameras onto EZVIZ to that I can access them remotely without having to go via the NVR (since I am having stability issues with this on the DNS - see thread) I have successfully added two cameras but the third is not showing up! EZVIZ is showing error...

This is still a problem and has just happened again. I am getting the same error message in IVMS "The device is not registered in the DDNS" I cannot access the NVR via its ip address on the network yet it is not raising a "network disconnected" exception fault. If I unplug the network cable...

Thanks guys How can I limit the number of times I connect to the DDNS? Is this a setting in the NVR? I will see if there are any firmware updates for the router. Is there a way of getting the NVR to reboot if it detects a loss of network? - - - Updated - - - BTW I am using a BT Homehub 3

I have a DS-7608NI-SE/P NVR and 3 HIKVISION IP cameras connected and operating generally quite well. My problem is that every so often when I try to view the live view via the iVMS-4500 phone app I get the error message "device not registered on DDNS". As soon as I reboot the NVR this error...