Recent content by Ivan1985

These scripts (unpack.sh, repack.sh) support only Video intercom and Door bells devices. Please use hikpack tool for NVRs.

I am not sure, but check next files: app.tar.lzma/1024x600.cfg app.tar.lzma/MiniGUI.cfg

Please try to formulate questions in more structured way. There are no limitations for the firmware version number and you can update this device by one and the same firmware or by repacked firmware this the same version.

Please try: pip3 install pycryptodomex

Most probably you have installed this library for Python2 instead of Python3

Attached repacked firmware with updated gui_value11.cfg file. I have also updated the scripts to replace gui_value11.cfg in the overseas.tar.lzma Please use next sequence: 1. Copy gui_value11.cfg, digicap.dav and scripts into one folder. 2. Run ./unpack.sh 3. Run ./repack.sh 4. Updated...

I will send to you repacked file and all instructions later today.

The file information gui_value11.cfg: ISO-8859 text, with very long lines, with CRLF line terminators But I don't know which tool may be used to edit this file.

I try to help you, if I will have time.

Link to the VIS_11_H5_INDOOR_EN_STD_V1.5.1_190319 firmware (device DS-KH8301-WT): KH serie-Hikvision This firmware version supports Polish language...

The language code patch for intercom indoor monitors based on H5 platform: 1. I have found, how the language code is patched in the VIS_11_H5_INDOOR_STD_V1.5.0_181101 firmware (This firmware was attached to my previous post) The patched file is hicore. The patched function is GET_BOOT_PARAMS...

There are scripts to unpack/decrypt and encrypt/repack firmware (digicap.dav) for Hikvision IP Video Intercom and IP Door Bells devices (see attached). To run scripts: Linux (tested on Ubuntu), Python3 and cryptodome python library are needed. To unpack/decrypt firmware: 1) Copy digicap.dav...

Firmware update by using Batch Configuration Tool: 1. Connect device to network and power on it 2. Wait some time before device is started 3. Run as administrator the Batch Configuration Tool 4. You shall see the information about all Hikvision devices at the bottom part of the screen. 5. The...

Sorry, I don't understand your question, could you please rephrase it?

I have used batch configuration tool and tftp tool