jack7's latest activity
-
Jjack7 replied to the thread Overcome limit 256ch on SmartPSS.GiovanniG, you said: "Shortly, if on the phone with DMSS the client can see all his bough Dahua cameras, without limitations, on his PC...
-
Jjack7 replied to the thread Overcome limit 256ch on SmartPSS.Another possible method to overcome SmartPSS limits: Use Devices Export, Import, and Delete for groups of devices to manipulate the...
-
Jjack7 replied to the thread See current frame rate and gain within a set range.@wittaj @sebastiantombs OK, I tested more and Tinycam seems to have multiple problems. I rarely use it but remembered that FPS...
-
Jjack7 reacted to wittaj's post in the thread See current frame rate and gain within a set range with
Like.
Keep in mind that apps do process and do different things in order to stream to the mobile device effectively... If I open up BI on my... -
Jjack7 reacted to sebastiantombs's post in the thread See current frame rate and gain within a set range with Like.
After looking at the spec sheet, while this camera appears to be a Dahua OEM, it is a 5MP camera on a 1/2.7" sensor which removes it...
-
Jjack7 replied to the thread See current frame rate and gain within a set range.Assuming a camera is set to 15 FPS, if shutter speed is changed to 1/3 sec, Tinycam reports 3 FPS for the camera. I just tested it...
-
Jjack7 replied to the thread See current frame rate and gain within a set range.I believe slow shutter speeds can influence FPS and may be of interest to OP.
-
Jjack7 replied to the thread See current frame rate and gain within a set range.In Tinycam android app camera Live View, push Info icon twice and you will see the camera's current fps and KB/s in realtime.
-
Jjack7 replied to the thread Need Amcrest recommendation.Here's an Amcrest camera that should meet all your stated requirements. It's likely a big step up from what you use today...
-
Jjack7 replied to the thread How to get Live View across multiple monitors / devices with DS-7608NI-K1/8P.If you haven't found it, try this in RTSP url. 001 for Mainstream resolution or 000 for Substream.
-
Jjack7 replied to the thread How to get Live View across multiple monitors / devices with DS-7608NI-K1/8P.Try using Hikvision NVR Zero Channel feature. It should send a single 1920x1080 video stream with all your cameras displayed just like...
-
Jjack7 replied to the thread Close up Camera project.Another one, a POE 1080p bird box camera. I have not used it...
-
JHere is a shot. Tool bag on the left is 7 inches away, oil cans on the right are 11.5 inches away.
-
Jjack7 replied to the thread Best way to shut down an ip camera when at home.Just remembered that I have a Camect hub device that does what you want to do. Not likely of any use to you but you might find the...
-
-
Jjack7 replied to the thread Best way to shut down an ip camera when at home.@mr_ipcam With contrast=0, you would still be recording audio if mic is on. If that's a problem, you could use API to enable/disable...
-
Jjack7 replied to the thread PTZ mount for under pitched roof....under gable mount.Here's a mount board made a few years ago for a big PTZ when first installed. It's still there today but looks better and uses POE...
-
-
Jjack7 replied to the thread How to stop the white light turning on in the night automatically.Call Univew support and ask them. If you can't find a way to turn it off, try putting some black electrical tape over the place where...
-
Jjack7 replied to the thread SmartPSS is using a lot of data when idle.With a short test, I don't get results similar to you. My PC PSS has 4 cams, one is P2P. Same PSS version as you. Task manager shows...
-
Jjack7 replied to the thread How to setup Chromecast.My previous post was relevant to your question. You apparently don't understand what tinycam chromecast feature is. Also, chromecast...
-
Jjack7 replied to the thread Share web interface to outside?.Another way to access the Web UI of a remote Dahua camera is to add it to SmartPSS using P2P. Then in PSS Device CFG, click camera...
