Recent content by java

Just for general information, I solved the problem. I don't know why but the camera lost its network settings (the time and other settings were ok). I've used wireshark in order to detect camera's new IP. It is working fine since then.

alastairstevenson, I did what you said, no luck. By the way, camera is connected to a PoE switch - SF302-08P. Also I tried to power it on using passive PoE, it seems that the camera is working (IR leds are briefly on when I power it on), but it is unresponsive as usual.

I'm experiencing the exact issue !! A few weeks ago the camera (DS-2CD2232-I5) went unresponsive. The symptoms are the same as described by thosirl. I'm very sad and I have doubts about quality of Hikvision cameras. Some details : 1. The camera is installed outside 2. The temperature was below 0...

whoslooking, Yes I understand that, but I don't want to use a splitter, if the camera itself supports PoE (802.3af) I want to connect only an RJ45 cable into it and nothing more

Del Boy, no I'm not doing that, I do nothing at the camera end, I just connected RJ45 cord into RJ45 socket fenderman, yep this could be the problem, but I tried to use a short patch cord, also without any success. Anyway I will try to use an active PoE injector, thank you

Hi whoslooking, so as I specified above the power source gives me 12V and the camera is also expecting 12V, everywhere is 12V, why isn't it working ? Should I use only active PoE injector ? Hi alastairstevenson, should I use only active PoE injectors which conforms with 802.3af standard ...

The first one is this : Tycon Power Systems POE-INJ-S Passive POE Injector Shielded And the second one : Mikrotik : http://routerboard.com/RBGPOE I see from mikrotik specification that it is passive non 802.3af

I'm trying to make camera(DS-2CD2232-I5) to work using PoE. So at the switch end I'm using a PoE injector, but nothing is happening, the camera doesn't boot up. I tried two different PoE injector vendors. On the injector of one vendor there is a led which becomes green when I switch on the...

So from what I understand camera DS-2CD2532F-IS has a built in mic. My question is : Will the sound be recorded near video stream ? Or the sound will be available only when you are connected into camera web interface ?

I'm also planning to buy this camera, only because it has a built in microphone. How good is the quality of sound ?