Here is what I had to do to fix it for all the warehouses and my home setup. I typically run cameras at 7 fps, some even 5 fps. I noticed that one of my cameras that was at 10 fps was running mostly fine. So, for all the cameras that were 1080P or higher resolution using substream I had to...
I've checked on the substreams and it appears they are setup correctly. I'm also fairly sure its not related to network congestion.
I changed a couple of the 4 and 8MP cameras from CBR and VBR and it isn't perfect but much better. It is no longer timing out when live viewing from the...
I run four different BI systems at our warehouses and one at my home. Each of the warehouses have over 30 cameras wiith one having 52 cameras and my home system having sixteen. 75% of the cameras are Amcrest 4+ MP cameras. All are using substream. I have been running on blue iris 5.5.4.5...
Had a very similar issue. Running 40 cameras and they suddenly quit working. After troubleshooting I decided to roll windows back from 1709 to 1703 and all the cameras came back up. I emailed support to let them know.
I was using a synology DS212j with a few vivotek and foscam cameras at a smaller warehouse. After about 6 cameras it started using a lot of CPU. We added another 10 cameras which caused me to look at other options. I needed to keep the size and cost down for the PC, so I ended up buying an...
I have an HTPC setup with two monitors that I run BI on. We use the big screen TV(monitor) for all our media in our living room. Below that I have a 2nd security monitor that comes out of the same PC I have put all the cameras on. All runs great as long as both the TV and monitor are running...
I am currently using a Night Owl Poseidon DVR. I am going to be adding IP cameras and phasing out the night owl very soon. I have set up Blue Iris with the Night Owl and it is working great. One thing I cannot figure out is how to make the camera that detects motion zoom to full screen and...