Hello everyone
I have a DS-2CD3T36WD-I5 camera, platform G0, firmware version 5.4.41. Updated via tftp to reset the IP parameters and password. But unsuccessfully! Firmware updated to version 5.5.0, but the IP parameters and password are not reset even through tftp! Can anyone help reset...
I mean the area in the memory chip. In the NVR E-series, this area is located at 0x2E000. In the DVR series F / N, this area is located at the address 0x3F000. I change it using a programmator, previously desoldering the chip.
Hello everybody. @montecrypto, thanks for continue developing the tool. I tried to repack the K41 firmware, but the device did not accept it. The tool after repacking adds two files after the cramfs image, and in the original firmware only one new_20.bin. Can you check it?
P.S. Ready to donate...
Hi guys! I bought at tao bao HDTVI DVR DS-7804HUH-F1 / N. With the traditional Chinese language. I tried to modify the firmware using the @montecrypto's hikpack, but have failed. Somebody tried to modify the firmware of this DVR?
Thanks for the explanation. If I will try get a dump of the memory chip, it will help solve the problem? I myself would not be able to solve the problem of decrypting the dump, need assistance of @montecrypto.
I have received CN camera on G0 platform (2135F-IW) and I modified original firmware by switching default language on EN in configuration file. But after repacking modified firmware, device did not accept it. The firmware ver. 5.4.0. Does anyone had success with this version?
Hello montecrypto. Thanks for the work you've done. I want to transfer you some donations, but cant do it through Paypal, the payment does not pass. Do you have webmoney?
I think you can use the same procedure as with the NVR. But IP cameras use Nand flash. To desoldering it you need to have some skills. And not all programmators can read it correctly. You can also use the program method, as wrote Monteсrypto, but it requires the hacker skills.