Recent content by kedens

Thanks for all the assistance. I will get a second CPE210 for test/practice purposes since they are reasonably priced. There are trees on the property but line of sight between locations is pretty good. VHF radios work well between house, shop and barn. If successful with the CPE210's I...

I looked at the references provided and searched the radios. I also did a search on “TP-Link Point-to-Multipoint (PtMP)” and a TP-Link CPE210 came up in the listing. I happen to have one of these that I have never used. I could set it up as an experiment and connect 8-10 cameras (via Cat-5)...

What if I use repeaters instead of bridges and connect the PoE switch up-link to the repeater cat-5 port?

Sounds like I will be digging trenches and burying cat-5. Hub is for laptop to view cameras while in shelter. Can eliminate hub when I get 16 port PoE switch. My current PoE switch does not have enough ports to attach laptop.

I do have intermittent problems during the day with the existing wireless cameras which I assume are atmospheric related. The diagram mistakenly shows 10 wireless cameras instead of 14 cameras I currently have in use. My overall goal is to replace all existing wireless cameras with PoE cameras...

I would like to thank everyone for their comments and recommendations. I would like to acknowledge that I meant to say “bridge” instead of range extender. I also realize that I did not provide enough information to present a clear understanding what I want to do. I am located in a rural area...

Has anyone connected a PoE camera switch up link port to the Ethernet port of a router set up as a signal extender. If you have, what were your results? A diagram of what I have in mind is attached.

Any pro's/con's for running a WD purple in an external USB chassis?

The wireless AP must be connected to a router to work properly. Wasn't advertised when I researched the AP but I quickly found out after a call to the vendor when it would not work properly. However I must say it works great and I am considering adding a second AP to reach other parts of...

I am running 14 cameras on a i5-6500 with 16gb ram. I did all the recommended options with all cameras set to 15fps. CPU runs between 8-11 percent, memory usage is about 20 percent. I highly recommend doing the optimization.

I have a separate network (LAN) that is not connected to the internet. It includes a dell PC, a router, an 10-port POE switch, and an outdoor wireles AP on a 20' mask. The PC is connected to the router by Ethernet. The outdoor wireless AP is connect to the EOP switch witch is connected to...

My BI machine is in a different location so it will be another day for individual camera status configuration if you need it. I have included a screen capture of 12 cameras from my browser. Two cameras are offline and not shown because I am in the process of moving them and adding more...

I have 14 Jennov wireless IP cameras that have been working flawlessly for over 3 years. Cost range from $39.00 for 2MP to $125.00 (+) for high end definition and other capabilities.