Recent content by LaGraBow

  1. L

    Amcrest NVR 4108-HS

    Still going great. FW - V4.000.00AC000.0
  2. L

    Amcrest NVR 4108-HS

    @Revo2Maxx Yes I will report back. This is the longest the cams have ever stayed on the monitor.
  3. L

    Amcrest NVR 4108-HS

    OK. NVR reset done. It has been two hours and cameras are ALL still showing - no red locks. I did not get the cams back in the original order, but not sure that's a big concern. [only 7 cams] Bandwidth registering at 65.72/88.00 @bigredfish @Flintstone61 @Revo2Maxx @wittaj I want to thank you...
  4. L

    Amcrest NVR 4108-HS

    yes and very delicious too I am now installing Palemoon to try again.
  5. L

    Amcrest NVR 4108-HS

    @wittaj Sorry forgot an important piece of info. Currently using Linux distro openSuse Tumbleweed. Tried Palemoon. Didn't work.
  6. L

    Amcrest NVR 4108-HS

    When I originally did my cameras I just set them static through the web GUI. Some show as static, some show as manual on my router page. Not sure why. Another problem: I used to be able to view my Amcrest cams or Dahua cam on a web GUI [Internet Explorer days] . Now screen asks to download a...
  7. L

    Amcrest NVR 4108-HS

    If I am not doing the cams, should I unplug them? Will my camera IP's stay the same if I don't reset them?
  8. L

    Amcrest NVR 4108-HS

    OK So, to factory reset. I have gone through your video, thank you for making it @Revo2Maxx 1] Do I have to unplug the cams before I do the reset? 2] Will I have to upgrade to the latest FW once the reset is done or will the NVR keep the FW? 3] Will I lose all my record history from the NVR HDD...
  9. L

    Amcrest NVR 4108-HS

    OK TY done
  10. L

    Amcrest NVR 4108-HS

    where is that being shown?
  11. L

    Amcrest NVR 4108-HS

    @wittaj Is this what you mean?
  12. L

    Amcrest NVR 4108-HS

    @Revo2Maxx connected router into NVR and cam system through 8 port switch Error: I could not see your service on nnn.nnn.nnn.nnn on port (80) Reason: Connection timed out
  13. L

    Amcrest NVR 4108-HS

    @bigredfish My NVR and cams are separate from my router [no cable] I cannot get to the NVR Web GUI because my NVR is not connected to my router. I only have access to my NVR and cams through the NVR GUI on my monitor. Shall I hook NVR back into the router? @Revo2Maxx When I go to...
  14. L

    Amcrest NVR 4108-HS

    @wittaj I am guessing you mean accessing the router? When I took the NVR off the router I rebooted the router and after the reboot none of the cams were showing on the router. After rebooting the NVR, I checked the cams and all were accessible through the main menu > Camera> Image would this...
  15. L

    Amcrest NVR 4108-HS

    @bigredfish No, NVR not port forwarded. Cams and NVR separated from router rebooted router rebooted NVR Setup: NVR to 8 port switch 6 cams connected to 8 port switch cable connected from 8 port switch to 4 port switch 1 camera connected to 4 port switch **Note: Wireless cam not detected on...
See more
Top Bottom