Recent content by LoinKing

FIXED In Ezviz app. Go to Settings page for the camera. Privacy Settings -> Video Encryption. Disable it. Then reboot camera and NVR.

FIXED In Ezviz app. Go to Settings page for the camera. Privacy Settings -> Video Encryption. Disable it. Then reboot camera and NVR.

Same issue with both codecs

I'm using Web GUI, already set the mainstream in Video/Audio settings. Where is the second option?

1. 7616NXI-K2 (latest firmware V4.75.005_230630) 2. NVR supports H.265, other hikvision cameras also running on h.265 and working fine 3. Both main & substream are set to h.265 4. Main stream is failing in live view & playback on HDMI, Web GUI and Hikconnect. Only works if choose substream.

I have Ezviz h8c 2K+ camera with latest firmware. Its working perfectly fine on Ezviz Studio/App and shows video in full resolution. I was able to add it easily to Hikvision 7616 nvr and its shows sub-stream on NVR as well. However, when I view camera in full-screen, then it goes blank. I've...

I have Ezviz h8C 2K camera. Added it to Hikvision NVR but I'm only able to see substream, full-screen/main stream in NVR shows as blank. However, on Ezviz Studio/App, it shows Full resolution view perfectly fine. Is this related to firmware rtsp update or some other issue?

Does it make a difference if I setup Smart Event area/sensitivity on NVR vs camera?

So did you get NI or NXI (AcuSense) nvr? I'm thinking about upgrading my existing NI one to AcuSense?

I'm planning on getting nxi-k2 to add acusense capability to existing hikvision cameras. I'm mainly interested in Human motion detection alerts during scheduled times. Currently, intrusion detection on current cameras triggers by cats & leaves. As per NXI-K2 datasheet, it supports Motion...

It's been few months and we're not getting any notifications from Smart Events i.e. intrusion detection etc. Curious, is it because we're supposed to configure the Smart Events in NVR vs Cameras? For example, we have a AcuSense camera setup to detect human and then flash light. I walked in...

1U and 1.5U are form factors if you need to rackmount the nvr. If you're asking that means you don't need to worry about it :) AcuSense NVR is needed only if cameras don't have AcuSense. Personally, I would get cameras with Acusense and regular DS-7608NI-I2/8P. Another recommendation, get one...

Yes, already have 8 cameras and hikvision nvr. Was mainly hoping to address the false intrusion detection issue, thought if I could get better night color quality that would be great! https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/ds-2cd2047g2h-liu/ What...

The only 4MP Hikvision cameras I see with 1/1.8" sensor are Pro-series ColorVu ones. But I haven't seen good opinions about ColorVu on this forum, and afaik it requires the built-in white led light to be turned on to get good color image, right?

Currently have two DS-2CD2043G0-I (4MP) cameras for narrow alleys on both sides of the house. The problem is that wind blowing leaves and stray cats etc trigger the smart event on them all the time (false alarms). The latest version of these cameras (DS-2CD2046G2-IU) have AcuSense feature...