Recent content by lorenjz

That IP range is set specifically for the cameras and the server doesn't hand out addresses in that range.

Correct the cameras are not reading license plates and they are fix I did try stopping the other service but that didn't have any affect on the performance of blue iris.

All of the cameras live on a separated VLAN. I have two NICs setup on the VM that hosts Blue Iris, one that carries the security camera VLAN, and one that carries our "normal" network traffic. I have a PFSense machine that is responsible for the routing of our network and an aruba managed...

I appreciate the thought but I've got all my cameras on static addresses.

They are all set to 15fps. I can dial that back a bit. I can also stop the other service to see if that helps. I did check the POE budget and I've got loads of power supply left in that switch.

I can

The cameras are Amcrest UltraHD 4k cameras. I did do the find/inspect for them. I just updated the model information without any change.

Hello, I've been trying to track down a "No signal" issue with blue iris over the last week. I've increased the buffer to 20mb as well as checked the video settings on the cameras. I also did check into the network card as described on a troubleshooting post on the blue iris forum. I'm...

I installed the DS-HD1 about a month ago. I started to setup Zoneminder and then noticed that the doorbell camera would simply disconnect for some reason. I went in to my unify network manager and then realized that it only stays connected for between 5 and six minutes at a time, disconnects...