Recent content by MasJoko

thank you very much sir, followed your tips and other.. turns out my NVR is working again normal. all its left is "always offline" platform access, and i cannot remote it outside my home. will try again finding the tutorial..

i managed to get these, any ideas on what to do next? like soldering which color cable to which pins on the usb

my mistakes, i thought it was rs-232 but it was vga. all it have in the back is rs-485 i manage to get my hands on a 4pin 1.5mm jst connector, which is like this and i managed to put in the only possible header on the mainboard (lower left of the pic) and have a really snug fit i'm still...

yes i have the ip set as static in my laptop and pc so i dont have to buy a 4pin jst zh 1.5mm connector? or is it still necessary?

yes i have the digicap.dav in the same folder as the tftpserv apps i've also tried with 1 router + laptop, the result is the same with direct.. about 6-7 ping reply, then timeout. then i tried 1 router + switch + my pc... it could not even ping 192.0.0.64. i see this usb ttl converter in my...

had the same issue with my nvr DS-7216HQHI-F1/N (bricked after firmware upgrade). everytime it boot, only stuck at "embedded net dvr + hikvision logo" i've tried the tftp method, i plugged in my laptop directly to nvr, with my laptop ip is 192.0.0.128. and also i've tried pinging 192.0.0.64 -t...

had the same issue with my nvr DS-7216HQHI-F1/N (bricked after firmware upgrade). everytime it boot, only stuck at "embedded net dvr + hikvision logo" i've tried the tftp method, i plugged in my laptop directly to nvr, with my laptop ip is 192.0.0.128. and also i've tried pinging 192.0.0.64 -t...