naamang's latest activity
-
Nnaamang replied to the thread Time keeps moving 1 hour ahead.All my cameras are already on a 32-port POE switch, and the NVRs are configured to not sync with cameras. They are now out of sync with...
-
Nnaamang replied to the thread Time keeps moving 1 hour ahead.It's only happening with Dahua cameras in my case. All my Hikvision cameras are good. Some of the Dahua cameras will change to -4:00 and...
-
-
Nnaamang replied to the thread Cameras keep going forward an hour.Thanks
-
NThat won't kill the service. What happens is that the Windows time service will grab the port (123) that NetTime also uses. So you...
-
NIt's been a while since I did it, but if you go to SETTINGS > TIME & LANGUAGE > DATE & TIME you can turn off Windows setting the time...
-
Nnaamang replied to the thread Cameras keep going forward an hour.Thanks
-
Nnaamang replied to the thread Cameras keep going forward an hour.Thanks. I read on the NetTime website to ensure that the Windows Time Service is disabled along with any other NTP servers but didn't...
-
NYes, setup your local computer as the time server, use the NetTime program referred to a few posts above, then in each camera settings...
-
Nnaamang replied to the thread Cameras keep going forward an hour.I'm a bit confused. You said in your first post to uncheck the NTP & DST boxes on the cameras and sync with the NVR that syncs with my...
-
NIf it works, then you know it isn't the camera and is some other device/program that is causing it. That is what I am leaning towards...
-
Nnaamang replied to the thread Cameras keep going forward an hour.I can find a single port injector around here somewhere tomorrow and give that a shot but don't know what that will accomplish if it...
-
Nnaamang replied to the thread Cameras keep going forward an hour.one is a SD50432XA-HNR two are SD49425XB-HNR and the forth one in by Empire Tech but is Dahua camera rebranded.
-
Nnaamang replied to the thread Cameras keep going forward an hour.Okay, downloaded Pale Moon browser and get the same issue. I sync with PC and it's good for a little over a minute then goes forward an...
-
-
Nnaamang replied to the thread Cameras keep going forward an hour.All my cameras are connected to a 16-port POE switch as are both my Dahua and Hikvision NVRs. I set them up it this way so I could...
-
-
Nnaamang replied to the thread Cameras keep going forward an hour.I'm using Google Chrome and have been for years. No issues getting any of the other settings to stick. I'm not finding the time setting...
-
Nnaamang replied to the thread Cameras keep going forward an hour.Yes, tried that already, as listed in the thing tried in my original post. It will change to the correct time but then change back when...
-
Nnaamang replied to the thread Cameras keep going forward an hour.Well, I just checked my ISP's router time settings and it's set to Eastern Daylight Time but it's also saying UTC-04:00, where my...
-
-
Nnaamang replied to the thread Cameras keep going forward an hour.Well, that last all of about 5 minutes and then went forward an hour again. Signed back into the camera setting and found that it has...
-
-
Nnaamang replied to the thread Cameras keep going forward an hour.I just verified that Automatic Time Sync is unchecked on iVMS-4200. Thanks
-
Nnaamang replied to the thread Cameras keep going forward an hour.No, I used to but replaced it with iVMS-4200, as Smart PSS is s**t IMO
