Recent content by nico2786

Hi! Install new app Procontrol+

HI! Work only (and i fix the problem and new firmware 4.2 work perfectly) setenv bootcmd ';update' not setenv ';update'

OK! help command don't work... only this command setenv bootcmd ';update'

Hi! After press control-u output is this: U-Boot 2010.06-svn17727 (Sep 19 2017 - 16:59:23)[V1.4.5] Hit ctrl+u to stop autoboot: 0 HKVS $ help HKVS $ HKVS $ HKVS $ dir HKVS $ list HKVS $ commmand HKVS $ hkvs HKVS $ HKVS $ HKVS $ i don't have command list...

OK, i start console e press control-u now?

There are another solution to force the dvr to ask TFTP server a file? because the dvr start with ip 192.0.0.64, a video have a gui but if i insert user don't accept, only the password...

Hi! I've a serial ttl! :-D Only for confirm, the connector is this?

This is the photo of motherboard of ds-7208hthi-k2 where is the connector for rs232?

Hi! In the back panel I don't have DB9 connector... If you see https://www.radio-materiel.ch/upload/rama/Datasheet_of_DS-7200HUHI-K_P_V4.2.0_20190223.pdf page 4 I've only 485

HI! I've big problem with hikvision 7208hthi-k2. I flash new firmware but ad reboot the dvr work partial, don't is possible login ecc... I see that the DVR set ip to 192.0.0.64, I try to tftp procedure but the dvr don't ask the firmware at boot. So i think i need to access to console but I see...