Recent content by Night-Owl

Just as a update, I got a 5416-4KS2(V2.0) now, only cost me £160 and does what I need. I wish I had checked out the size though, these things are big in width and length. No longer will fit in a TV cabinet, so had to be repositioned, somewhere temp until I find a TV cabinet big anough for it :)

Thanks, that's a big uplift, not sure if I would even use it, but I guess as the older one is not getting any firmware updates, it's more of a forced situation if I want to keep up to date with things.

Hi, i am hunting for a new nvr, from what i can see, you can get a 5416-4KS2(V2.0) without drive for around £160 or a 5416-EI for around £450, both have 2 * 1GB ports and the later only has 54 Mbps more throughput than the later i.e 320Mbps vs 384Mbps. So what is all the extra money for, can...

Excellent, I will be on the hunt for one of these today, thank you

Hello All, I have an update, concentrating on the switch on the back of the NVR their are 8 POE and 8 Normal, I gradually connected to everyone, all showed activity I.e I see flashing lights on the external switch it was connected too and all POE's powered up a test camera fine, however only 4...

Hello No, I don't use bridge mode.

Really I only need a decent nvr with good bandwidth and 2 separate 1gb nics so I can still have my separate subnets and still connect from Internet as sooner or later 100mb ports taking the load of 9 cameras and growing through 1 port is going to cause a bottleneck. The benefit of using...

Hi, I have 9 poe cameras all connected to various poe switches through the house, I then take a cable from any of those and plug it into any of the 16 switch ports on back of nvr, setting the switch to an ip from the 192.168.1.x range because this is the range all my cameras are on. I then...

Can I just confirm thst each of the 2 ports can be set to run of separate subnets please ?, thank you.

Thank you, perfect.

I had 7 × 4k and 2 x 2k cameras at between 15 and 25 fps plugged into 1 poe port via another switch, no issues at all. They are only 100mb ports on NVR switch also, would prefer 2 x 1gb ports on separate nics, but I worked with what I had. If Dahua or Hikvision do a NVR that has 16 channels...

Hi, yes, totally exhausted, swopped out cables, used cable tester, even added another nvr to same leads etc and it picked up cameras no issue. If I change the lan port over to the 192.168.1.x range, finds cameras straight away, just not if I add that range to switch as it was :(.

Thanks, lovely but don't need 32 channels etc, very nice though :)

Such a pain issue, makes zero sense as powers poe cameras up fine from the poe ports still, just simply does not find them anymore. Guess i am off shopping for the 5xxx-EI line.

Can anyone confirm if the DHI-NVR5416-4KS2(V2.0) can be setup do both ports can be set to different ip ranges/ subnets please ?. As I dont need poe ports, so thinking this would be suitable replacement ?. Thank you