Thanks again for that good info.
It is a pity that such straight forward info cannot be found on the HikVision site.
A good example is worth a thousand words...
Now that it works, I will not change anything...
Another question.
I have a magnetic door lock at the entrance where the doorbell will be located.
Does the Relay to unlock the door have to be connected to the doorbell or the indoor station ?
It shall of course be activated by the "key" button...
trempa92, thank you very much for your help !
(or Hvala vam like you say)
After the factory reset (called "RESTORE ALL") on both units, I did the following.
Doorbell (IP : x.y.z.110):
set IP address of my LAN (or DHCP)
Intercom/session settings, set IP address of the indoor station under...
Hi guys,
I have the same two indoor and doorstations, they are up-to-date with the latest firmware found on the HikVision site.
INDOOR : VIS_INDOOR_R0_EN_STD_V2.1.46_build220607
DOORSTATION : VIS_VILLA_H11_EN_STD_V2.2.53_220602
The indoor station can access the doorstation, use the camera and...