Recent content by pedromrg

  1. pedromrg

    Purchase recommendation

    Hi there, After reading 1/3" CMOS @ 4 MP versus 1/2.7 @ 5 MP - I have questions from @wittaj I believe that a good cam to cover back, side and front of my house (will need 3) is the Dahua DH-IPC-HFW3241EP-S-0280B-S2 I will be using this with Frigate so AI stuff is not needed, still could not...
  2. pedromrg

    FreePBX with Dahua VTO + 2x VTH

    ok bingo. I can now call VTO and VTH Missing the video, but a good thing is that I can now turn video ON linphone and see some data, but no video up. Trunk configs, can you check and see if you spot anything ? linphone: Thank you
  3. pedromrg

    FreePBX with Dahua VTO + 2x VTH

    Thank you again. I have this registered on VTO.... now I need to figure out how to forward 8001 to SIP_VTO in FreePBX. I will try and make a test tonight.
  4. pedromrg

    FreePBX with Dahua VTO + 2x VTH

    So to resume what I have now: VTO - acting as SIP SERVER 8001 VTH registering to VTO SIP SERVER FreePBX trunk on VTO 9901#2 I can now receive calls from the VTO to all the VTHs (video OK) To Linphone/Zoiper sounds is OK but... Video Not ok, still trying to figure this one out. ----------- Call...
  5. pedromrg

    FreePBX with Dahua VTO + 2x VTH

    Ok, got the Trunk up to 9901#2 Now created an inbound route Do I need to take anything esle in consideration? Can I call from a SIP phone to any VTH?
  6. pedromrg

    Dahua doorbells, monitors and external SIP servers

    News... I have configured FreePBX 15 on a VM exactly like you said... connected everything. I can make calls but the video does not show at all. I think this might be related with my actual hardware, VTO2000A is quite old might be diffrent than yours. So I went back to FreePBX 16 configured...
  7. pedromrg

    Dahua doorbells, monitors and external SIP servers

    Another idea from riogrande was to setup VTO as a SIP server, standard config.... and them do a sip trunk to a free extention 9901#2 for example, group call active... all calls will be sent to all VTHs and PBX
  8. pedromrg

    Dahua doorbells, monitors and external SIP servers

    Ok will do, VTO and VTHs on the latest versions as well... Will test later.
  9. pedromrg

    Dahua doorbells, monitors and external SIP servers

    Issue might be the version, Ibgot v15 today installed it and it's fresh. Will configure everything later and check.
  10. pedromrg

    Dahua doorbells, monitors and external SIP servers

    I have mine on a virtual machine, what version are you using?
  11. pedromrg

    FreePBX with Dahua VTO + 2x VTH

    Good idea, I'm going to try this one later and report back. Thanks :)
  12. pedromrg

    FreePBX with Dahua VTO + 2x VTH

    Thank you for the reply riogrande. Never thought that could work. How can I register freepbx on VTO Server SIP trunk? Then you mean register both screens on VTO SIP server and home SIP phone and mobile phones on FreePBX ? Also crossed my mind installing Asterisk v16 (seems to be the one that...
  13. pedromrg

    Dahua doorbells, monitors and external SIP servers

    testing with Zoiper on my Android, also get a black image.
  14. pedromrg

    Dahua doorbells, monitors and external SIP servers

    Using FreePBX My setup is: VTO - 8001 VTH 1 - 9901 VTH 2 - 9902 I'm a newbiew here so excuse some miss understanding. Does this log help: This is after making a call from 9901 to the VTO 8001 during the call I can't see any image. Also if someone rings the door when I answer the call...
  15. pedromrg

    Dahua doorbells, monitors and external SIP servers

    Hello mikhan, I'm currently struggling to make this work with VTO2000A, VTH1510CH and VTH5221D. Currently they can call each other but the issue is that the video is black. Also when I setup the Ring Group ext 9000, when VTO calls to the ring group on the VTHs shows on
Top