Recent content by Peter

Hello why dont you look at C3-100,200,400 series access Control PCBs. I Think they offer same functionality as InBio series but cheaper. I am also curious how these can integrate with Hikvision and Dahua systems. --> zkteco.com

Always ask for a photo of the label on the camera - Always!

Hello having a DS-2CD2032F 5.2.0 English now after whoslooking video turorial and an DS-2CD2432-IWS cube camera now 5.2.5 after CBX upgrade. How can I edit and change the CH to WR that displays in SADP and webinterface but also the serialnumber and MAC address? Thanks Peter

Ok so iVMS-4520 and hik connect is the same thing didnt realize Aha I thought they used 12V as their cameras do. I too found some various passive poe extractors like one with 2 rj45 connectors and a Little built-in step-down converter module to 12V and 5V output - perfect to fit in a little...

If Hikvision has done it right you could probably connect a smoke alarm to alarm inputs to cameras and label them and setting their conditions/linkage in the camera, nvr etc.. There are access panels and security panels that I have seen having wired/wireless zones - surely these must seamlessly...

A sidenote, what would be the purpose of the indoorstation? - I can not bring it with me when doing daily tasks if someone chimes the bell but the phone is always in the pocket.

Hello, have you tried iVMS-4520 or Hik-Connect which are similar softwares as iVMS-4500 but has some kind of intercom interface. I think cameras can be added to iVMS-4520 also. I am also about to buy this DS-KV8102-IP/VP intercom outdoor unit. According to Tech support EU VP-version does not...

Ok nice but where in MTD5 and MTD6 do I change MAC, serial and CH to WR? Thanks

I was thinking its good to change CH to WR so it shows up properly in SADPtool and in webinterface. if on 5.2.0 5.2.3 5.2.5 can I change MAC adress and serialnumber if I change checksum also? So I would like to change these things to scrable it around a Little. Problem is I dont have original...

Yes it should be possible, I used Whoslooking's video on how to do it - https://www.ipcamtalk.com/showthread.php/5988-MTD-HACK-made-easy-on-Video?highlight=mtd+hack+video It is said to be a permanent fix to english/international version however it still reads as CCCH as opposed to CCWR...

Thank you so much Whoslooking for this fine video explaining how to use hexeditor and putty also. After the editing, programming and restoring to factory defaults, it still reads CCCH instead of CCWR. Can I safely upgrade from 5.2.0 to for example 5.4.0 if I want to and it is still...

These cameras look interesting with some smart features and ptz etc.. Reasonable price also given ptz and all jazz included. Downside is that the doomed version does not have ir but instead has a more protected doome. Doom version looks like an outdoor version but not sure. Maybe someone has...

I am not familiar with these cameras but I have heard there is a rubber/foam ring around the lens preventing ir reflection back into the lens - check it! If there is too much ir light cast in the middle then maybe one can carefully bend the 5mm leds in the inner ring a little bit outward to...

Yea I have seen here only good reputation about Julia but never bought from her. I am also going to mount it up above the door in the ceiling so to speak so it looks down at the guest. I dont know if the smart ir function really works on these cameras and if it doesnt then maybe the 2532 with...

This image is only 47kB so cannot really see any detail - maybe post original images!