disabling multi tpu support leads to the following log. Alas, nothing detected when I try test pics on the explorer
Please let me know if I should test anything else.
Thank you for working on this!
16:53:05:Client request 'Quit' in queue 'objectdetection_queue' (...700ea6)
16:53:05:Update...
OK, I set the log level to TRACE, stopped yolo and started coral
Server page shows "lost contact"
Did a refresh (CTRL F5), this is the log
16:41:58:Update ObjectDetectionYOLOv5Net. Setting AutoStart=false
16:41:58:Sending shutdown request to ObjectDetectionYOLOv5Net/ObjectDetectionYOLOv5Net...
I just installed 2.5RC8.
I have a CORAL dual TPU with an pci adapter that enables both TPUs.
Upon installing the CORAL module and enabling the new multi TPU support I get these errors after a while
12:12:07:ObjectDetectionCoral went quietly
12:12:07:
12:12:07:Module 'Object Detection (Coral)'...
I am also waiting for my dual edge tpu and the pci adapter to arrive. I'd be willing to give it a shot, too.
Gesendet von meinem Pixel 6 Pro mit Tapatalk
this is the BI side of things (I am still using BI4):
goto the camera you would like to use as a virtual motion sensor, camera properties, alerts, choose the profile you want to edit, in the actions section choose "run a program or execute a script", configure, on the new window fill in the path...
I don't know much about smart things but you can habe BI send a command to a virtual switch within smart things on detecting motion. Then you can handle the desired logic with turning on/off lights within smart things.
My home automation is a PI running openhab and I have BI sending a curl...
my ze had a focus issue which should be sorted out by now. The ze has a little longer zoom range.
The older model has more of a mickey mouse face (lens plus two separate ir) whereas ze has one solid black block in the center which might be more noticeable. You won't make anything wrong with...
@looney2ns I must have been rather thick when I connected the mic to Audio out. It was rather late ...
Thanks for the tip with the POE splitter, that was the missing puzzle piece.
I finally found the time to take the cam apart.
After having a hard time to unscrew one of the screws that was obviously sitting tight in a very bad thread the source of the noise was easily located. Some of the cables where pressed against the fan wheel! After rerouting the cables so they...
Thanks for your response. The manual was not clear to me regarding the mic, so I'll attach an external one.
My other Dahua 4x PTZ does not make any noise so this was unsettling . Your confirmation that some level of noise is to be expected is reassuring.