Recent content by RichM

The update for the app that was released today resolved the problem on my Androids Rich

I reported it the other day along with log files from the device. Rich

The last update killed the app. Don't bother doing an uninstall and reinstall. I already tried that and it didn't make any difference whatsoever. We have 3 Android phones and two of them no longer work. The 3rd one, I was able to go in and uncheck 'Auto Update', as soon as it was powered...

FWIW this is what I use. You can find it on ebay etc. Not cheap, but very effective. I paid around $39 for 1 pint which will make about 16 one gallon mixes. It works on my outside cameras for about a month and a half at each spraying. Less if exposed to rain. (I spray a band around the...

My home is all brick so I didn't want to start drilling a lot of holes to run Ethernet cables. I use several of these to run pairs of Hikvision cameras. But, I use a POE+ power injector to ensure that they don't starve for power...

I had the same problem and 2.0.43 solved it. But, somehow, the LAN address I had changed from 192.168.1.xx to 292.168.1.xx. Changed it back and all is OK again.

There will be an IP address for each device using the Home Plug. You can go into your router configuration and assign a 'fixed' LAN address for each camera/MAC address so that it is doesn't change.

I just got the latest update (4.1.9.2) and all is well again.

Try to start the app and it just says" UNFORTUNATELY, Blue Iris has stopped! Never had a problem before the latest update. Powered phone off/on many times with the same result. So, I no longer have alerts while I'm away. Is there a way to back off an update for the app? Thanks, Rich

Not only am I now using a few Logitech 700E cameras via POE, but I also have one of my Hikvision DS-2CD2332-I cameras running through one of my old Logitech powerline adapters.

Thanks again fenderman, that got me back to where I wanted to be. Rich

Thanks. I didn't realize that I could just run an older update file. I used your link from another thread to download 4.1.6.1 and that resolved my problem. I'll be out a lot over the weekend and was worried I wouldn't get alerts while away. I'd like to get back to 4.1.9 though. Is that...

I have 8 cameras. A mix of Hikvision and Logitech. After I updated to 4.2.1 today, none of the cameras trigger on motion detection. (Well, actually, two still do but with problems, see below for that) I noticed a spider web on two cameras and they weren't triggering alerts. So I started...