Recent content by rudeboy-86

thank you, but this firmware is not for the camera purchased on aliexpress

hi! where can I download firmware for the ds-2cd-2035-I camera ?

yes Com port it too most in your SPI FLASH there had to be a u-boot loader. It is enough to restore the firmware for restoration connect DVR to the computer from the established putty, at inclusion of DVR press CTRL+U, then start tftp and enter "Update" into putty

there is information on cameras, everything is similar to DVR https://www.ipcamtalk.com/showthread.php/2666-UART-connection-to-recover-Hik-cameras

In that case, it is necessary to be connected to uart and to see the log of loading in putty

firewall disabled?

when [2016-07-04 23:40:32] TFTP server [192.0.0.128] initialized you shall reconnect DVR power supply ip of your personal computer has to be 192.0.0.128 the full log of tftp: [2016-07-01 13:40:24] TFTP server [192.0.0.128] initialized [2016-07-01 13:40:29] Device[192.0.0.64]test tftpserver...

original firmware + tftp has to help you

what about such method?

version of the current firmware on the NVR? Here is the latest version of the firmware http://www1.hikvision.com/cn/download_more_699.html#prettyPhoto I modified it by means of firmwaretool (now it is EN/ML) you can download an insertion of https://yadi.sk/d/wxeTJRVcstoud from here

Hello ! Firmware Tools does not change the language in the firmware version 5.4.0 taken from a Chinese website . http://www1.hikvision.com/cn/download_more_714.html (DS-2CD2XX5). Telnet, SSH is not available. Are there any solutions change the language in the firmware ?